Production of Fatty Acid Methyl Ester Surfactants using Palm Oil with Various Reaction Temperatures and Duration
Authors:
Open Access
- 31 May 2024
- journal article
- research article
- Published by Universitas Gadjah Mada in Agritech
- Vol. 44 (2) , 144-152
Abstract
Most surfactants are made from petrochemicals, posing significant environmental concerns due to the non- biodegradable and non-renewable nature. To address this challenge, surfactants from biodegradable, non-toxic, and harmless materials are required, such as Fatty Acid Methyl Ester (FAME) derived from palm oil. Therefore, this research aimed to investigate the effect of reaction tempetarures and durations as well as the interactions on the yield of FAME surfactants. The characteristics of the highest yield of FAME surfactants were also examined, including HLB (hydrophilic-lipophilic balance) value, surface tension, CMC (critical micelles concentration), density, and pH values. The study was conducted using Completely Randomized Factorial Design with three (3) factors, namely temperature (50 and 60 °C), reaction duration (60, 90, and 120 minutes), and the interaction. The results showed that the highest yield of 82.43% was produced at an interaction reaction temperature of 60 °C and a duration of 120 minutes. The characteristics of surfactants obtained were HLB value of 5.47, surface tension of 30.49 dyne/cm, capable of reducing surface tension by 73.20% (from 72.80 to 19.52 dyne/cm), CMC, density and pH values of 1.50% (v/v), 0.8757 g/cm 3 , and 6.86, respectively. These characteristics suggested that FAME has the potential for application as a water-in-oil (w/o) emulsifier. Moreover, the results could be applied to produce biodegradable surfactants using tropical oils through easy and simple technology.Keywords
This publication has 15 references indexed in Scilit:
- Biosurfactants: Production, properties, applications, trends, and general perspectivesBiochemical Engineering Journal, 2022
- QSPR for predicting the hydrophile-lipophile balance (HLB) of non-ionic surfactantsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2021
- Investigation of saponification mechanisms in biodiesel production: Microscopic visualization of the effects of FFA, water and the amount of alkaline catalystJournal of Environmental Chemical Engineering, 2020
- Norm descriptors for predicting the hydrophile-lipophile balance (HLB) and critical micelle concentration (CMC) of anionic surfactantsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2019
- Emulsification of animal fats and vegetable oils for their use as a diesel engine fuel: An overviewRenewable and Sustainable Energy Reviews, 2015
- Estimation of surface tension of fatty acid methyl ester and biodiesel at different temperaturesFuel, 2014
- A review on biodiesel production using catalyzed transesterificationApplied Energy, 2010
- Biodiesel production process optimization and characterization to assess the suitability of the product for varied environmental conditionsRenewable Energy, 2009
- Transesterification of neat and used frying oil: Optimization for biodiesel productionFuel Processing Technology, 2006
- The Behavior of Sorbitan Surfactants at the Water–Oil Interface: Straight-Chained Hydrocarbons from Pentane to Dodecane as an Oil PhaseJournal of Colloid and Interface Science, 2001