No Evidence for Passivation Effects of Na and K at Grain Boundaries in Polycrystalline Cu(In,Ga)Se2 Thin Films for Solar Cells
Abstract
Thin‐film solar cells based on Cu(In,Ga)Se2 (CIGSe) absorber layers reach conversion efficiencies of above 20%. One key to this success is the incorporation of alkali metals, such as Na and K, into the surface and the volume of the CIGSe thin film. The present work discusses the impact of Na and K on the grain‐boundary (GB) properties in CIGSe thin films, i.e., on the barriers for charge carriers, Φb, and on the recombination velocities at the GBs, sGB. First, the physics connected with these two quantities as well as their impact on the device performance are revised, and then the values for the barrier heights and recombination velocities are provided from the literature. The sGB values are measured by means of a cathodoluminescence analysis of Na‐/K‐free CIGSe layers as well as on CIGSe layers on Mo/sapphire substrates, which are submitted to only NaF or only KF postdeposition treatments. Overall, passivating effects on GBs by neither Na nor K can be confirmed. The GB recombination velocities seem to remain on the same order of magnitude, in average about 103–104 cm s−1, irrespective of whether CIGSe thin films are Na‐/K‐free or Na‐/K‐containing.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Technologie (03240768B, 03240768C)
- Helmholtz-Gemeinschaft (HIRS-0008)
This publication has 37 references indexed in Scilit:
- Confined and Chemically Flexible Grain Boundaries in Polycrystalline Compound SemiconductorsAdvanced Energy Materials, 2012
- Nanometer-scale electronic and microstructural properties of grain boundaries in Cu(In,Ga)Se2Thin Solid Films, 2011
- Influence of grain boundaries on current collection in Cu(In,Ga)Se2 thin-film solar cellsThin Solid Films, 2009
- Electrically Benign Behavior of Grain Boundaries in PolycrystallineFilmsPhysical Review Letters, 2007
- Formation reactions of chalcopyrite compounds and the role of sodium dopingThin Solid Films, 2007
- Na incorporation into Cu(In,Ga)Se2 for high-efficiency flexible solar cells on polymer foilsJournal of Applied Physics, 2005
- Kelvin probe force microscopy of semiconductor surface defectsPhysical Review B, 2004
- Kelvin probe force microscopy for the nano scale characterization of chalcopyrite solar cell materials and devicesThin Solid Films, 2003
- Measurement of minority-carrier lifetime by time-resolved photoluminescenceSolid-State Electronics, 1992
- Dielectric constant of CuInSe2 by capacitance measurementsJournal of Physics and Chemistry of Solids, 1979