6.4W picosecond 10 μm generation based on BGSe difference-frequency generation and optical parametric amplification
Authors:
- Zhitai ZhouZZZhitai Zhou
- Jian TangJTJian Tang
- Wenhao ChengWCWenhao Cheng
- Minglang WuMWMinglang Wu
- Jinwen TangJTJinwen Tang
- Xiaoxiao HuaXHXiaoxiao Hua
- Wenlong YinWYWenlong Yin
- Lirong WangLWLirong Wang
- Jiyong YaoJYJiyong Yao
- Tongyu DaiTDTongyu Dai
- Baoquan YaoBYBaoquan Yao
Preprint
- 25 August 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
A high-average-power picosecond long-wave infrared (LWIR) source around 10μm is demonstrated based on a cascaded ZGP optical parametric generation (OPG) and BGSe difference frequency generation / optical parametric amplification (DFG/OPA) architecture pumped by a 2051.2 nm Ho:YLF laser at 20 kHz. The thermal behavior of BGSe under high-power pumping was first investigated to guide the beam-size and divergence design. Based on this design, the temperature-angle characteristics of the BGSe DFG stage were investigated, showing that high-power LWIR output can be obtained over multiple temperature and angle combinations and indicating the operating flexibility of BGSe phase matching for high-power 10 μm generation. The influence of BGSe interaction length on DFG power scaling and beam quality was then examined. Increasing the BGSe crystal length enhanced the idler output power and conversion efficiency; however, the beam quality degraded significantly for the 130 mm configuration. Therefore, a beam-quality-prioritized 70 mm BGSe DFG condition was selected, producing about 2.5 W of 10 μm LWIR output with M²x = 2.1 and M²y = 2.9. This DFG-generated 10 μm radiation was subsequently used as the seed for a BGSe OPA stage. With 85 W pump power, the amplified LWIR output reached 6.4 W at 10.09 μm, with a spectral FWHM of 0.19 μm, a pulse duration of 316 ps, and beam quality factors of M²x = 2.6 and M²y = 4.0. These results indicate that a high-quality DFG-seeded BGSe OPA scheme is an effective route for power scaling of picosecond LWIR generation and demonstrates the potential of BGSe for high-power LWIR output.Keywords
This publication has 15 references indexed in Scilit:
- Homogeneous growth of bulk BaGa 4 Se 7 single crystal and femtosecond laser performance and photodarkeningJournal of the Optical Society of America B, 2025
- Plasma electron acceleration driven by a long-wave-infrared laserNature Communications, 2024
- Optical dichroism in ZnGeP2 crystals at deep levelsJournal of the Optical Society of America B, 2022
- Watt-level long-wave infrared CdSe pulsed-nanosecond optical parametric oscillatorOptics & Laser Technology, 2022
- Recalibration of the nonlinear optical coefficients of BaGa4Se7 crystal using second-harmonic-generation methodOptics Letters, 2021
- Laser-induced damage threshold of the nonlinear crystals BaGa4Se7 and BaGa2GeSe6 at 2091 nm in the nanosecond regimeJournal of the Optical Society of America B, 2020
- High-repetition rate, mid-infrared, picosecond pulse generation with µJ-energies based on OPG/OPA schemes in 2-µm-pumped ZnGeP2Optics Express, 2020
- 11 µm, high beam quality idler-resonant CdSe optical parametric oscillator with continuous-wave injection-seeded at 2.58 µmOptics Express, 2020
- Watt-scale 50-MHz source of single-cycle waveform-stable pulses in the molecular fingerprint regionOptics Letters, 2019
- General numerical methods for simulating second-order nonlinear interactions in birefringent mediaJournal of the Optical Society of America B, 1997