Long‐term aging effects on tensile characterization of steel fibre reinforced concrete
- 18 May 2016
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 17 (6) , 1082-1093
Abstract
The paper discusses the effect of aging on steel fibre reinforced concrete (SFRC) after 10 years. The aim is to observe the change in mechanical properties, especially of the residual post‐cracking tensile strength, due to long‐term aging. For this purpose, a comparison between the results of four‐point bending tests (4PB) at the age of 1 year and 10 years was carried out and it indicates that aging affects the serviceability post‐cracking residual strength, increasing fibre interfacial bond strength. Material classification is performed according to fib Model Code 2010 for 1‐year old and 10‐year old specimens. The objective is to estimate possible changes in the material class through the years. Three‐ and four‐point bending test results on 10‐year old specimens are described, together with a comparison between those tests. Both tests showed very similar results; slightly higher values were obtained with the three‐point bending (3PB) test. The tensile constitutive law is obtained according to fib Model Code 2010 and is compared with results of direct tensile tests on cylindrical specimens and Double Edge Wedge Splitting tests on prismatic specimens. A plane section (PS) approach adopting the tensile constitutive law is applied to predict the bending behaviour in terms of nominal stress against crack mouth opening displacement and it is compared with the bending test results.Keywords
This publication has 19 references indexed in Scilit:
- New model for the indirect determination of the tensile stress–strain curve of concrete by means of the Brazilian testMaterials and Structures, 2012
- Fibre reinforced concrete: new design perspectivesMaterials and Structures, 2009
- FRC: structural applications and standardsMaterials and Structures, 2009
- Mechanical properties of steel fibre reinforced concrete exposed at high temperaturesMaterials and Structures, 2009
- Fracture Properties of FRC Determined through Inverse Analysis of Wedge Splitting and Three-Point Bending TestsJournal of Advanced Concrete Technology, 2005
- Post-cracking behaviour of steel fibre reinforced concreteMaterials and Structures, 2005
- Mode I Fracture Behavior in Concrete: Nonlocal Damage ModelingJournal of Engineering Mechanics, 2001
- Interface property characterization and strengthening mechanisms in fiber reinforced cement based compositesAdvanced Cement Based Materials, 1997
- The microstructure of the steel fibre-cement interfaceJournal of Materials Science, 1985
- Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elementsCement and Concrete Research, 1976