Properties of Recycled PS/SBR Blends: Effect of SBR Pretreatment
Authors:
Open Access
- 1 August 2016
- journal article
- research article
- Published by SAGE Publications in Progress in Rubber, Plastics and Recycling Technology
- Vol. 32 (3) , 111-128
Abstract
The properties of recycled styrene-butadiene rubber (SBR) blended with virgin polystyrene (PS) have been investigated over a wide range of concentrations (0–94% wt. SBR). The compounds were prepared by twin-screw extrusion followed by injection molding. A pre-treatment in solution (toluene) was also performed to improve the compatibility between the phases. Extraction tests and thermogravimetry were used to determine the amount of PS inserted in the SBR particles. Morphological analysis (SEM) coupled with physical (density and hardness) and mechanical (tension, flexion, torsion and impact) measurements were performed to assess the final behavior of the mixtures. The results show that the proposed treatment can improve the properties, especially at SBR concentrations greater than 50% wt.Keywords
This publication has 21 references indexed in Scilit:
- Compatibility of waste rubber powder/polystyrene blends by the addition of styrene grafted styrene butadiene rubber copolymer: effect on morphology and propertiesPolymer Bulletin, 2013
- Temperature and Molecular Weight Dependence of Mutual Diffusion Coefficient of Cyclic Polystyrene/Cyclic Deuterated Polystyrene Bilayer FilmsMacromolecules, 2012
- New developments in flame retardancy of styrene thermoplastics and foamsPolymer International, 2007
- On the Molar Mass Dependence of the Thermal Diffusion Coefficient of Polymer SolutionsMacromolecules, 2005
- Impacts of Polystyrene Molecular Weight and Modification to the Repeat Unit Structure on the Glass Transition−Nanoconfinement Effect and the Cooperativity Length ScaleMacromolecules, 2005
- Reclamation and recycling of waste rubberProgress in Polymer Science, 2000
- Thermoplastic elastomers from blends of polystyrene and natural rubber: morphology and mechanical propertiesEuropean Polymer Journal, 1999
- Processing and morphology of polystyrene/ethylene‐propylene rubber reactive and nonreactive blendsPolymer Engineering & Science, 1995
- The effect of cryogenically ground rubber on some mechanical properties of an unsaturated polyester resinPolymer Engineering & Science, 1988
- Effect of cryo‐ground rubber on melt flow and mechanical properties of polypropylenePolymer Engineering & Science, 1986