Softening and snap‐back instability in cohesive solids
Author:
- 1 July 1989
- journal article
- research article
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 28 (7) , 1521-1537
Abstract
The nature of the crack and the structure behaviour can range from ductile to brittle, depending on material properties, structure geometry, loading condition and external constraints. The influence of variation in fracture toughness, tensile strength and geometrical size scale is investigated on the basis of the π‐theorem of dimensional analysis. Strength and toughness present in fact different physical dimensions and any consistent fracture criterion must describe energy dissipation per unit of volume and per unit of crack area respectively. A cohesive crack model is proposed aiming at describing the size effects of fracture mechanics, i.e. the transition from ductile to brittle structure behaviour by increasing the size scale and keeping the geometrical shape unchanged.For extremely brittle cases (e.g. initially uncracked specimens, large and/or slender structures, low fracture toughness, high tensile strength, etc.) a snap‐back instability in the equilibrium path occurs and the load–deflection softening branch assumes a positive slope. Both load and deflection must decrease to obtain a slow and controlled crack propagation (whereas in normal softening only the load must decrease). If the loading process is deflection‐controlled, the loading capacity presents a discontinuity with a negative jump. It is proved that such a catastrophic event tends to reproduce the classical LEFM‐instability (KI = KIC) for small fracture toughnesses and/or for large structure sizes. In these cases, neither the plastic zone develops nor slow crack growth occurs before unstable crack propagation.Keywords
This publication has 13 references indexed in Scilit:
- Snap‐through and snap‐back response in concrete structures and the dangers of under‐integrationInternational Journal for Numerical Methods in Engineering, 1986
- Ductile-brittle transition by varying structural sizeEngineering Fracture Mechanics, 1985
- Damage accumulation and crack growth in bilinear materials with softening: Application of strain energy density theoryTheoretical and Applied Fracture Mechanics, 1984
- Notch sensitivity in fracture testing of aggregative materialsEngineering Fracture Mechanics, 1982
- Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elementsCement and Concrete Research, 1976
- Quasi-Static Extension of a Tensile Crack Contained in a Viscoelastic-Plastic SolidJournal of Applied Mechanics, 1974
- Optimizing the control of rock failure in servo-controlled laboratory testsRock Mechanics and Rock Engineering, 1971
- The spread of plastic yield from a notchProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1963
- Yielding of steel sheets containing slitsJournal of the Mechanics and Physics of Solids, 1960
- The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracksJournal of Applied Mathematics and Mechanics, 1959