Corrosion and Inhibition Tests on copper‐base alloy tubes in flowing conditions
Authors:
- 1 December 1977
- journal article
- Published by Wiley in Materials and Corrosion
- Vol. 28 (12) , 834-837
Abstract
A corrosion loop has been asembled to study the behaviour of CuZn15, CuZn29Sn1, CuZn22Al2 tubes in flowing synthetic seawater. The apparatus allowed to carry out electrode potential measurements and to record the polarization resistance on tube electrodes. Moreover, by using a pulse technique of photopotential determination, it was possible to observe “in situ” the modification of surface layers of oxides or of corrosion products in the various experimental conditions. The paper discusses some results concerning: the action of thebenzimidazole‐2‐thiol organic inhibitor; the influence of the surface state of the metallic material on the action of the inhibitor; the influence of polluting agent (S2−) or a prefilming treatment on the inhibitor efficiency; the possibility of corrosion monitoring by linear polarization measurements.Keywords
This publication has 4 references indexed in Scilit:
- Corrosion of Condenser Tube Alloys in Sulfide Contaminated BrineCorrosion, 1975
- Inhibition of copper corrosion in chloride solutions by heterocyclic compoundsMaterials and Corrosion, 1973
- Photopotential measurements in the study of surface layers in metal corrosion, inhibition and passivation phenomenaThin Solid Films, 1972
- Application of the polarization resistance technique to corrosion monitoringCorrosion Science, 1964