Analysis of the Combustion Characteristics of a HCCI Engine Operating on DME and Methane
Authors:
- Yujiro TsutsumiYTYujiro Tsutsumi
- Katsuhiro HoshinaKHKatsuhiro Hoshina
- Akira IijimaAIAkira Iijima
- Hideo ShojiHSHideo Shoji
- 30 October 2007
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
Abstract
The Homogeneous Charge Compression Ignition (HCCI) engine has attracted much interest in recent years because it can simultaneously achieve high efficiency and low emissions. However, it is difficult to control the ignition timing with this type of engine because it has no physical ignition mechanism. Varying the amount of fuel supplied changes the operating load and the ignition timing also changes simultaneously. The HCCI combustion process also has the problem that combustion proceeds too rapidly. This study examined the possibility of separating ignition timing control and load control using an HCCI engine that was operated on blended test fuels of dimethyl ether (DME) and methane, which have vastly different ignition characteristics. The influence of the mixing ratios of these two test fuels on the rapidity of combustion was also investigated. Moreover, as a basic research subject, the behavior of formaldehyde (HCHO), an intermediate that is produced by cool flame reactions, was observed by spectroscopic techniques. The experimental results revealed that, within the range of the experimental conditions used in this study, the quantity of DME supplied substantially influenced the ignition timing, whereas it was little affected by the quantity of methane supplied. This indicates that the ignition timing can be controlled by the quantity of DME supplied and that the load can be adjusted by the quantity of methane supplied. Spectroscopic measurements of the behavior of a substance corresponding to HCHO also indicated that the quantity of DME supplied significantly influenced the cool flame. However, the rapidity of combustion could not be controlled even by varying the mixing ratios of DME and methane. It was made clear that changes in the ignition timing substantially influence the rapidity of combustion.Keywords
This publication has 20 references indexed in Scilit:
- A Study on Combustion Control by Using Internal and External EGR for HCCI Engines Fuelled with DMESAE International Journal of Advances and Current Practices in Mobility, 2006
- Analysis of Combustion in DME and Methane-Fueled HCCI Engine2005
- Operating Conditions Using Spark Assisted HCCI Combustion During Combustion Mode Transfer to SI in a Multi-Cylinder VCR-HCCI EngineSAE International Journal of Advances and Current Practices in Mobility, 2005
- A Study of Gasoline-fuelled HCCI Engine Equipped with an Electromagnetic Valve TrainSAE International Journal of Advances and Current Practices in Mobility, 2004
- The Effect of Intake Temperature on HCCI Operation Using Negative Valve OverlapSAE International Journal of Advances and Current Practices in Mobility, 2004
- Expansion of HCCI Operating Region by the Combination of Direct Fuel Injection, Negative Valve Overlap and Internal Fuel ReformationSAE International Journal of Advances and Current Practices in Mobility, 2003
- Compression ignition mechanisms of methane/DME composite fuelThe proceedings of the JSME annual meeting, 2003
- The Effect of POx on the Autoignition Chemistry of n-Heptane and Isooctane in an HCCI EngineSAE International Journal of Advances and Current Practices in Mobility, 2002
- Numerical Calculation of the Homogeneous Charge Compression Ignition Process by using an Elementary Reaction Model of Dimethyl Ether.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B, 2001
- Computing with thermochemical dataCombustion and Flame, 1969