Investigation into Electrochemical Micromachining Process during Micro-Channel Generation
Authors:
- 21 June 2011
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 26 (8) , 1019-1027
Abstract
Electrochemical micromachining (EMM) appears to be very promising as a future micromachining process due to higher machining rate, better precision and control, and wide range of materials that can be machined. The present article highlights the experimental study of EMM process parameters, i.e., pulse frequency, machining voltage, duty ratio, electrolyte concentration, and micro-tool feed-rate, and their influences on micromachining criteria such as material removal rate (MRR) and machining accuracy during micro-channel generation. Scanning type strategy is considered for the movement of micro-tool during micro-channel generation Experiments are planned based on response surface methodology (RSM) and conducted on the indigenously developed EMM system setup. Empirical mathematical models of various process parameters on MRR and machining accuracy in EMM process are developed through RSM. The validity of the models is tested through analysis of variance (ANOVA). Optimal values for multiobjective optimization of the process parameters have been found out as pulse frequency of 52.2818 kHz, machining voltage of 10.1033 V, duty ratio of 68.3890%, electrolyte concentration of 85.1515 g/l, and micro-tool feed-rate of 208.5860 µm/sec for the maximum MRR and improved accuracy. Response surface plots for each response are analyzed. Condition of machined micro-channels is also analyzed through scanning electron microscope (SEM) micrographs. The developed models will be very useful to find out the optimal parametric setting to produce high accuracy micro-channels utilizing scanning movement strategy of micro-tool.Keywords
This publication has 11 references indexed in Scilit:
- Magnetic Assistance in Cylinder-Surfaces FinishMaterials and Manufacturing Processes, 2009
- Improvement of Electrochemical Microdrilling Accuracy Using Helical ToolMaterials and Manufacturing Processes, 2008
- A study of three-dimensional shape machining with an ECμM systemInternational Journal of Machine Tools and Manufacture, 2006
- Analysis of Roundness Error and Surface Roughness in the Electro Jet Drilling ProcessMaterials and Manufacturing Processes, 2006
- Micro-ECM for production of microsystems with a high aspect ratioMicrosystem Technologies, 2005
- Electrochemical deep hole drilling in super alloy for turbine applicationJournal of Materials Processing Technology, 2004
- LASER ENHANCED ELECTROCHEMICAL MACHINING PROCESSMaterials and Manufacturing Processes, 2002
- Electrochemical micro-machining: new possibilities for micro-manufacturingJournal of Materials Processing Technology, 2001
- State of the Art of MicromachiningCIRP Annals, 2000
- Investigation for controlled ellectrochemical machining through response surface methodology-based approachJournal of Materials Processing Technology, 1999