Largely Improved Breakdown Strength and Discharge Efficiency of Layer‐Structured Nanocomposites by Filling with a Small Loading Fraction of 2D Zirconium Phosphate Nanosheets
- 11 December 2021
- journal article
- research article
- Published by Wiley in Advanced Materials Interfaces
- Vol. 9 (3) , 2101646
Abstract
Dielectric film capacitors have aroused considerable attention on account of the fast development of pulsed power systems. However, enhanced energy density is always acquired at the cost of deteriorated charge/discharge efficiency. Herein, well balanced energy density and efficiency are achieved in a series of reasonably designed bilayer composites consisting of a ferroelectric layer and a paraelectric layer at the meantime. It is interesting to find that, when merely 1.6 wt% Zr(HPO4)2 nanosheets are introduced into the ferroelectric layer, a substantially improved energy density of 11.22 J cm−3, which is about 165% that of the bilayer composite without Zr(HPO4)2 nanosheets, is achieved at 650 kV mm−1. Meanwhile, a high charge/discharge efficiency of 89.8% and a low loss tangent of 0.024@10 kHz which is much lower than the pristine ferroelectric polymer layer (0.058@10 kHz) is maintained. Furthermore, finite element simulation reveals that the electric breakdown paths will develop along the macroscopical‐interfaces between adjoining layers and the microcosmic‐interfaces between the Zr(HPO4)2 nanosheets and polymer matrix, which can effectively increase the length of breakdown paths and contribute to improved breakdown strength. This work demonstrates that the Zr(HPO4)2 nanosheets can be promising fillers for other high‐performance dielectric composites.Keywords
Funding Information
- National Natural Science Foundation of China (51773187)
- Fundamental Research Funds for the Central Universities (201961060)
This publication has 62 references indexed in Scilit:
- Dielectric response and breakdown behavior of polymer-ceramic nanocomposites: The effect of nanoparticle distributionComposites Science and Technology, 2017
- Ultra-high discharged energy density capacitor using high aspect ratio Na 0.5 Bi 0.5 TiO 3 nanofibersJournal of Materials Chemistry A, 2017
- High-Energy-Density Polymer Nanocomposites Composed of Newly Structured One-Dimensional BaTiO3@Al2O3 NanofibersACS Applied Materials & Interfaces, 2017
- Surface‐modified barium titanate by MEEAA for high‐energy storage application of polymer compositesHigh Voltage, 2016
- Functionalization of α-zirconium phosphate by polyphosphazene and its effect on the flame retardance of an intumescent flame retardant polypropylene systemRSC Advances, 2016
- Enhanced breakdown strength and suppressed leakage current of polyvinylidene fluoride nanocomposites by two-dimensional ZrO2 nanosheetsMaterials Express, 2016
- Improved Dielectric Properties and Energy Storage Density of Poly(vinylidene fluoride-co-hexafluoropropylene) Nanocomposite with Hydantoin Epoxy Resin Coated BaTiO3ACS Applied Materials & Interfaces, 2015
- Modeling Breakdown-resistant Composite DielectricsProcedia IUTAM, 2015
- Facile and effective promotion of β crystalline phase in poly(vinylidene fluoride) via the incorporation of imidazolium ionic liquidsPolymer International, 2013
- Structure and properties of starch/α-zirconium phosphate nanocomposite filmsCarbohydrate Polymers, 2009