An Experimental Study on Phenomena of Piston Ring Collapse
Authors:
- 4 March 2002
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This study has been conducted aiming at an experimental verification of the ring collapse phenomena that occurs in a taper faced second ring of a direct fuel injection type truck diesel engine. The oil film thickness of the second ring, the ring axial motion and the inter-ring pressure have been measured under various operating conditions of engine. As a result, it is verified that the back pressure of the second ring becomes lower than the second land pressure, and that the second ring oil film becomes extremely thick temporarily where the second ring contacts with the ring groove upper surface. It is also verified that blow-by passes through the second ring where the oil film of the second ring becomes thick. Hence it is highly probable that the collapse of the second ring has occurred at that time.Keywords
This publication has 6 references indexed in Scilit:
- Predicted and Measured Ring Pack Performance of a Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2000
- Simulation of Piston Ring Dynamics and Their Effect on Oil ConsumptionSAE International Journal of Advances and Current Practices in Mobility, 2000
- Modeling of Ring Twist For an IC EngineSAE International Journal of Advances and Current Practices in Mobility, 1998
- Variation of Piston Ring Oil Film Thickness in an Internal Combustion Engine - Comparison Between Thrust and Anti-Thrust SidesSAE International Journal of Advances and Current Practices in Mobility, 1998
- Practical Use of Two Piston Ring Set for Gasoline EngineSAE International Journal of Advances and Current Practices in Mobility, 1995
- Piston Ring Motion and Its Influence on Engine TribologySAE International Journal of Advances and Current Practices in Mobility, 1979