Cements based on kaolinite waste
Open Access
- 10 August 2018
- journal article
- Published by Copernicus GmbH in Advances in Geosciences
- Vol. 45, 133-138
Abstract
The cement industry involves high-energy consumption that generates high CO2 emissions into the atmosphere. Environmental concerns can be addressed by replacing parts of Portland cement clinkers with pozzolanic materials in mortars and concrete. Slag, fly ash and silica fume are materials considered for the planned replacement. Research studies on clay minerals, such as kaolinite, are being followed with special attention by the scientific community and the cement industry. It is well known that these minerals require an activation process to transform kaolinite (K) into metakaolinite (MK). MK is an amorphous material from the transformation of K with high pozzolanic activity, which is its capacity to react with the portlandite released during the hydration of Portland cement, generating compounds such as C–S–H gels and some aluminum-phase hydrates. One of the MK production methods is heat treatment controlled by kaolinite at temperatures in the range of 600–900 °C. Different residues have been used (coal mining, paper sludge and waste from a drinking water treatment plant) activated at 600 °C for 2 h to elaborate blended cements. Due to their good behaviour as future eco-efficient additions, this research is a study by x-ray fluorescence (XRF), x-ray diffraction (XRD) and scanning electron microscopy (SEM) of their influence on the performances of blended cement mixtures (binary and ternary one), with substitutions of pozzolan ratio at 28 days of hydration. The porosity of pozzolanic cements decreases because of the formation of hydrated phases during pozzolanic reaction.Keywords
This publication has 15 references indexed in Scilit:
- The Transformation of Coal-Mining Waste Minerals in the Pozzolanic Reactions of CementsMinerals, 2016
- Kinetics and mechanism of three stages of thermal transformation of kaolinite to metakaolinitePowder Technology, 2014
- Monitoring hydration in lime-metakaolin composites using electrochemical impedance spectroscopy and nuclear magnetic resonance spectroscopyClay Minerals, 2014
- Influence of activated drinking-water treatment waste on binary cement-based composite behavior: Characterization and propertiesComposites Part B: Engineering, 2014
- Study of hydrated phases present in calcined paper sludge (metakaolinite)/saturated CaO dissolution system cured at 40°C and 28 days of reactionMaterials Science and Engineering: A, 2010
- Metakaolin sand–blended-cement pastes: Rheology, hydration process and mechanical propertiesConstruction and Building Materials, 2010
- Re-use of drinking water treatment plant (DWTP) sludge: Characterization and technological behaviour of cement mortars with atomized sludge additionsCement and Concrete Research, 2010
- Influence of Activation Temperature on Reaction Kinetics in Recycled Clay Waste–Calcium Hydroxide SystemsJournal of the American Ceramic Society, 2008
- Compressive strength and hydration of wastepaper sludge ash–ground granulated blastfurnace slag blended pastesCement and Concrete Research, 2003
- Rietveld quantitative amorphous content analysisJournal of Applied Crystallography, 2001