Design and Failure Analysis of a Vacuum Pressure Vessel for Aerospace Applications using Finite Element Analysis (FEA)
Open Access
- 2 December 2024
- journal article
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 14 (6) , 17888-17893
Abstract
This paper provides detailed insights into the external pressure vessels. External pressure vessels are designed to perform under extreme operating conditions, so the selection of material and geometry along with stress analysis are fundamental for their optimal efficiency. The objective of this research is to provide a case study of the material, design, and stress generated in the pressure vessel to make it suitable for thermal and load-bearing applications in the aerospace industry. An aluminum alloy was chosen as the design material due to its low density and high strength. The modeling geometry of the alloy was constructed using the ASME section-VIII division-I div code. After the performed Finite Element Analysis (FEA), modeling was carried out deploying the ANSYS design modeler to obtain the stress concentration and failure mode of the model. The present study demonstrates the behavior of a structure under applied load and identifies the weak areas of its geometry. Based on the external stress at the center of the structure, the maximum and minimum stresses computed are 0.763 MPa and 0.00803 MPa, respectively. It was also found that the maximum strain is generated at the center of the structure and is equal to 1.0834e-6 mm/mm, the maximum deformation is equal to 0.00109 mm and also occurred at the center, while the shells of the model are unable to undergo any deformation. FEA results agree with the analytical results, as the errors for hoop stress and equivalent strain are 4.8% and 1.8%, respectively. Thus, the proposed method can be applied to predict the equivalent stress, equivalent strain, total deformation, and stress intensity, which are required for the structural integrity analysis of pressure vessels.Keywords
This publication has 19 references indexed in Scilit:
- Theoretical and Finite Element Analysis of Pressure VesselIndian Journal of Science and Technology, 2024
- Burst pressure prediction of carbon/natural fiber and hybrid composite pressure vessels by theoretical and numerical analysisHybrid Advances, 2024
- Design and analysis of single and multi-layer pressure vesselMaterials Today: Proceedings, 2023
- Finite element analysis of bursting pressure in FRP pressure vesselMaterials Today: Proceedings, 2022
- A finite element-based analysis approach for computing the remaining strength of the pressure equipment with a local thin area defectEngineering Failure Analysis, 2022
- A low cost validation method of finite element analysis on a thin walled vertical pressure vesselsJournal of Physics: Conference Series, 2020
- On the Influence of the Corrosion Defect Size in the Welding Bead, Heat-Affected Zone, and Base Metal in Pipeline Failure Pressure Estimation: A Finite Element Analysis StudyJournal of Pressure Vessel Technology, 2019
- Analytical and Numerical Studies of a Thick Anisotropic Multilayered Fiber-Reinforced Composite Pressure VesselJournal of Pressure Vessel Technology, 2018
- Design and Analysis of Vertical Pressure Vessel using ASME Code and FEA TechniqueIOP Conference Series: Materials Science and Engineering, 2018
- Stress Analysis And Design Optimization Of A Pressure Vessel Using Ansys PackageMaterials Today: Proceedings, 2018