Design of a passive RFID tag antenna at 2.45 GHz for mounting on various platforms
- 1 December 2011
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 293-297
Abstract
This paper presents the design of a passive RFID tag antenna operating at 2.45 GHz. The electromagnetic simulation software called CST is used for design and simulation. A high gain (5.842dB), a good impedance matching with the microchip (-30.0 dB Return Loss) and a satisfactory read range performance (upto 5 m) was obtained. One approach of designing RFID tag is that the tag should be less sensitive to the various types of objects. The effects of obstacles on antenna's characteristics have been investigated by placing the tag antenna against a metallic, rubber, glass and wood surfaces. Simulation results show slight variations which is within tolerance range.Keywords
This publication has 10 references indexed in Scilit:
- Shorted Microstrip Patch Antenna Using Inductively Coupled Feed for UHF RFID TagETRI Journal, 2008
- Orthogonally proximity‐coupled patch antenna for a passive RFID tag on metallic surfacesMicrowave and Optical Technology Letters, 2007
- RFID tag antenna using two‐shorted microstrip patches mountable on metallic objectsMicrowave and Optical Technology Letters, 2006
- An RFID Tag Using a Planar Inverted-F Antenna Capable of Being Stuck to Metallic ObjectsETRI Journal, 2006
- The Effects of a Metal Ground Plane on RFID Tag Antennas2006
- Compact slotted planar inverted-F RFID tag mountable on metallic objectsElectronics Letters, 2005
- Environmental Effects on RFID Tag Antennas2005
- Planar wire-type inverted-F RFID tag antenna mountable on metallic objects2004
- Patch antenna with EBG ground plane and two-layer substrate for passive RFID of metallic objects2004
- RFID Handbook2003