Vibration and handling stability analysis of articulated vehicle with hydraulically interconnected suspension
Authors:
- 18 April 2019
- journal article
- review article
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 25 (13) , 1899-1913
Abstract
Anti-roll hydraulically interconnected suspension (HIS) due to its roll-vibration stiffness and damping performance has been studied and applied in passenger vehicles, buses, and tri-axle straight vehicles. However, very few investigations have been made on six-axle articulated vehicles with the HIS system. Moreover, rollover accidents involving articulated vehicles cause severe casualties, which have attracted wide attention in the vehicle safety field. This calls for a design of a new suspension control technique to improve the handling stability performance at a lower cost and with less energy consumption. This paper presents an anti-roll HIS system control technique to improve the handling stability of a six-axle tractor–semitrailer with nonlinear uncertain parameters. Firstly, the HIS model for leaf-spring suspension of a half semitrailer is established by means of the linear transfer matrix method. Secondly, the power spectral density function is analyzed to validate the obtained model, and equivalent stiffness and damping are computed using natural frequency. Thirdly, six-axle vehicle equations with the HIS model are established considering the equivalent stiffness and damping parameter as the medium. Finally, numerical simulation results are provided and compared with the original vehicle. Dynamic response of the proposed technique is assessed by analyzing roll stability, lateral stability, yaw stability, and articulation stability. The results show that the proposed control technique can effectively improve the handling performance of an articulated vehicle.Keywords
Funding Information
- Jilin province science and technology development plan project (20180101074JC)
- Jilin Provincial Department of Education "Thirteenth Five-Year" Science and Technology Research Project (JJKH20190152KJ)
- National Key Research (2017YFC0804804)
- National Key Development Plan (2017YFC0804808)
This publication has 26 references indexed in Scilit:
- Road excitation classification for semi-active suspension system based on system responseJournal of Vibration and Control, 2017
- Comparison of the road-holding abilities of a roll-plane hydraulically interconnected suspension system and an anti-roll bar systemProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2016
- Dynamics analysis and design methodology of roll-resistant hydraulically interconnected suspensions for tri-axle straight trucksJournal of the Franklin Institute, 2016
- A hybrid approach to modeling and control of vehicle height for electronically controlled air suspensionChinese Journal of Mechanical Engineering, 2015
- A new approach to finite-time adaptive stabilization of high-order uncertain nonlinear systemAutomatica, 2015
- Integrated control of the differential braking, the suspension damping force and the active roll moment for improvement in the agility and the stabilityProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2014
- Evaluation of stress softening of the rubber suspension used on rail vehiclesProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2014
- Modelling and characteristic analysis of tri-axle trucks with hydraulically interconnected suspensionsVehicle System Dynamics, 2012
- Hydraulically Interconnected Vehicle Suspension: Optimization and Sensitivity AnalysisProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2010
- A comparison of leaf‐spring with aircushion trailer suspensions in the transport environmentPackaging Technology and Science, 1992