Progress in Evaluation of Deep Artificial Defects from Sweep-Frequency Eddy-Current Testing Signals
Open Access
Abstract
The article discusses the practical application of the method of electromagnetic non-destructive investigation of austenitic materials. To identify and evaluate deep artificial defects, the sweep-frequency eddy current method with harmonic excitation is used. The objects of interest are the surface electric-discharged machined notches, with a defined geometry, fabricated in a plate with a thickness of 30 mm. An innovative eddy current probe with a separate excitation and detection circuit is used for the investigation. The achieved results clearly demonstrate the robustness and potential of the method, especially for deep defects in thick material. By using the fifth probe in connection with the frequency sweeping of eddy currents, it is possible to reliably detect artificial defects up to 24 ± 0.5 mm deep by using low-frequency excitation signals. An important fact is that the measuring probe does not have to be placed directly above the examined defect. The experimental results achieved are presented and discussed in this paper. The conducted study can serve, for example, as an input database of defect signals with a defined geometry to increase the convergence of learning networks and for the prediction of the geometry of real (fatigue and stress-corrosion) defects.Keywords
Funding Information
- Slovak Research and Development Agency (APVV-19-0214)
This publication has 18 references indexed in Scilit:
- Characterization of multilayered structures by swept-frequency eddy current testingAIP Advances, 2019
- Thickness Measurement of Metal Plates Using Swept-Frequency Eddy Current Testing and Impedance NormalizationIEEE Sensors Journal, 2017
- Near electrical resonance signal enhancement (NERSE) in eddy-current crack detectionNDT & E International, 2014
- Rotating field eddy current probe with bobbin pickup coil for steam generator tubes inspectionNDT & E International, 2013
- Electromagnetic Nondestructive Evaluation: Present and FutureStrojniški vestnik - Journal of Mechanical Engineering, 2011
- Non-Destructive Techniques Based on Eddy Current TestingSensors, 2011
- Enhancing information level in eddy-current non-destructive inspectionInternational Journal of Applied Electromagnetics and Mechanics, 2010
- Development of computational inversion techniques to size cracks from eddy current signalsNondestructive Testing and Evaluation, 2009
- Shape reconstruction of multiple cracks from ECT signals by means of a stochastic methodIEEE Transactions on Magnetics, 2006
- Remote field eddy current testing for detection of stress corrosion cracks in gas transmission pipelinesMaterials Letters, 2004