Demonstration of kilowatt monolithic Yb-doped fiber laser operation near 980 nm
Authors:
- 20 October 2021
- journal article
- research article
- Published by Optica Publishing Group in Optics Letters
- Vol. 46 (21) , 5340-5343
Abstract
In this Letter, to the best of our knowledge, the first kilowatt monolithic Yb-doped fiber laser operating near 980 nm is demonstrated. The fiber laser is achieved with the help of an all-fiber amplifier fabricated with a 105/250- µ m core/cladding-diameter double-cladding Yb-doped fiber. With 11-W seed light, about 1.11-kW output power was obtained with 65.3% slope efficiency. The center wavelength was around 978 nm with a 10-dB bandwidth of about 0.6 nm. About 34-dB suppression of 1030-nm amplified spontaneous emission was realized, and the output beam quality ( M 2 factor) was about 16.2 at maximum output power. Better beam quality can be expected by optimizing the seed light and active fiber. This work can provide significant guidance for the study and designation of high-power fiber lasers operating near 980 nm and other three-level fiber sources.Keywords
This publication has 25 references indexed in Scilit:
- 5.5 W monolitic single-mode fiber laser and amplifier operating near 976 nm2016
- Experimental Study on All-Fiberized Continuous-Wave Yb-Doped Fiber Amplifier Operating Near 980 nmIEEE Photonics Technology Letters, 2015
- 32-fs Kerr-lens mode-locked Yb:CaGdAlO_4 oscillator optically pumped by a bright fiber laserOptics Letters, 2014
- Tapered large-core 976 nm Yb-doped fiber laser with 10 W output powerLaser Physics Letters, 2014
- Study on the output properties of fiber lasers operating near 980 nmJournal of the Optical Society of America B, 2013
- 980nm Yb-doped double-clad photonic crystal fiber amplifier and its frequency doublingOptics & Laser Technology, 2012
- High power fiber lasers: current status and future perspectives [Invited]Journal of the Optical Society of America B, 2010
- Degradation-resistant lasing at 980 nm in a Yb/Ce/Al-doped silica fiberJournal of the Optical Society of America B, 2010
- Impact of transverse spatial-hole burning on beam quality in large-mode-area Yb-doped fibersJournal of the Optical Society of America B, 2008
- Tapered single-mode fibres and devices. Part 1: Adiabaticity criteriaIEE Proceedings J Optoelectronics, 1991