An Experimental Investigation into Residual Stress Control of 24CrNiMo Alloy Steel by Selective Laser Melting
Open Access
Abstract
Residual stresses are a major problem in SLM forming of large-sized parts of high-performance materials. The purpose of this study is to investigate the effects of scanning strategy, preheating temperature, and heat treatment on residual stresses in SLM formed high-strength steels. An experimental method was used to investigate the residual stresses in SLM forming of high-strength steels. The peak and distribution of residual stresses can be changed by optimizing the scanning strategy. The most suitable scanning method is the strip rotation scanning strategy. The optimum substrate preheating temperature is 200 °C, and the residual stress of SLM forming can be significantly reduced by 62.5%. The annealing temperature has a clear effect on the residual stress release, and also has an impact on the microstructure and mechanical properties. After annealing treatment at 550 °C for 3 h, the residual stresses can be effectively released, while the uniformity of microstructure and mechanical properties is improved. Finally, the control strategy of residual stress, microstructure and mechanical properties of 24CrNiMo high-strength steel was obtained.Keywords
This publication has 28 references indexed in Scilit:
- Selective laser melting of 24CrNiMo steel for brake disc: Fabrication efficiency, microstructure evolution, and propertiesOptics & Laser Technology, 2018
- Effects of atomizing media and post processing on mechanical properties of 17-4 PH stainless steel manufactured via selective laser meltingAdditive Manufacturing, 2018
- An approach to predict the residual stress and distortion during the selective laser melting of AlSi10Mg partsThe International Journal of Advanced Manufacturing Technology, 2018
- Influence of process parameters on residual stress related distortions in selective laser meltingProcedia Manufacturing, 2018
- Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4VMaterials Science and Engineering: A, 2018
- Selective laser melting of H13: microstructure and residual stressJournal of Materials Science, 2017
- Selective laser melting of ultra-high-strength TRIP steel: processing, microstructure, and propertiesJournal of Materials Science, 2016
- Stress and deformation evaluations of scanning strategy effect in selective laser meltingAdditive Manufacturing, 2016
- Effects of vacuum annealing treatment on microstructures and residual stress of AlSi10Mg parts produced by selective laser melting processModern Physics Letters B, 2016
- Evaluations of effective thermal conductivity of support structures in selective laser meltingAdditive Manufacturing, 2015