State of the art on sustainable manufacturing using mono/hybrid nano-cutting fluids with minimum quantity lubrication
- 6 February 2022
- journal article
- other
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 37 (6) , 603-639
Abstract
In machining operations, the application of cutting fluids has been of prime importance for the extraction of heat from rake surfaces, ease of removal of the chips and reduction of friction at the chip–tool interface. These three objectives are achieved by the supply of suitable conventional cutting fluid at the machining zone using different techniques. However, the misuse of these fluids and their wrong disposal methods were found to have an adverse effect on the environment and health of human. To reduce the usage of conventional cutting fluid, minimum quantity lubrication (MQL) technique has been emerged as an alternative means in the last few years, leading to better eco-friendly. Further, to increase the sustainability of MQL technique, it becomes necessary to use an appropriate exceptional nanostructured material with MQL that could be an effective cutting fluid (i.e. nanocutting fluids) with better tribological and thermophysical properties, and might be helpful in addressing the eco-friendly problem to a great extent. Therefore, the present paper focuses on the review of important published works related to the use of mono/hybrid nanocutting fluids with MQL technique at various processing parameters in different metal cutting operations. Most of the studies have shown a significant reduction in cutting forces, temperature at cutting zone, tool wear, and friction coefficient, and considerable improvement in surface quality by the addition of mono/hybrid nanoparticles enriched cutting fluid in MQL technique as compared to dry as well as wet machining processes. Further, the paper discusses the future scope in the area of hybrid nano-cutting fluids in different machining processes.Keywords
This publication has 141 references indexed in Scilit:
- Anomalous Size Dependence of the Thermal Conductivity of Graphene RibbonsNano Letters, 2012
- Experimental characterization of micro-drilling process using nanofluid minimum quantity lubricationInternational Journal of Machine Tools and Manufacture, 2011
- Tribological behavior of polyalphaolefin with the addition of nickel nanoparticlesTribology International, 2010
- Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steelInternational Journal of Machine Tools and Manufacture, 2010
- Thickness-Dependent Thermal Conductivity of Encased Graphene and Ultrathin GraphiteNano Letters, 2010
- Studies on the Behaviour of the Green Particulate Fluid Lubricant in Its Nano Regime when Machining AISI 1040 SteelProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2010
- Tribological properties of diamond and SiO2 nanoparticles added in paraffinTribology International, 2009
- Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steelJournal of Materials Processing Technology, 2006
- Effect of MQL on the tool life of small twist drills in deep-hole drillingInternational Journal of Machine Tools and Manufacture, 2006
- Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloyInternational Journal of Machine Tools and Manufacture, 2005