The effects of different anode manufacturing methods on deep levels in 4H-SiC p+n diodes
Open Access
- 17 June 2024
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (23)
Abstract
The manufacture of bipolar junctions is necessary in many 4H-SiC electronic devices, e.g., junction termination extensions and p+in diodes for voltage class >10 kV. However, the presence of electrically active levels in the drift layer that act as minority charge carrier lifetime killers, like the carbon vacancy (VC), undermines device performance. In the present study, we compared p+n diodes whose anodes have been manufactured by three different methods: by epitaxial growth, ion implantation, or plasma immersion ion implantation (PIII). The identification of the electrically active defects in the drift layers of these devices revealed that a substantial concentration of VC is present in the diodes with epitaxial grown or ion implanted anode. On the other hand, no presence of VC could be detected when the anode is formed by PIII and this is attributed to the effects of strain in the anode region. Our investigation shows that PIII can be a useful technique for the manufacture of bipolar devices with a reduced concentration of lifetime killer defects.Keywords
This publication has 34 references indexed in Scilit:
- Impact of carbon injection in 4H-SiC on defect formation and minority carrier lifetimeMaterials Science in Semiconductor Processing, 2024
- Influence of neutron radiation on majority and minority carrier traps in n-type 4H-SiCNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2020
- Modelling the static on-state current voltage characteristics for a 10 kV 4H–SiC PiN diodeMaterials Science in Semiconductor Processing, 2020
- Enhanced annealing of the Z1∕2 defect in 4H–SiC epilayersJournal of Applied Physics, 2008
- Strain profile of (001) silicon implanted with nitrogen by plasma immersionJournal of Applied Physics, 2007
- Carrier compensation near tail region in aluminum- or boron-implanted 4H–SiC (0001)Journal of Applied Physics, 2005
- Electrically active defects in n-type 4H–silicon carbide grown in a vertical hot-wall reactorJournal of Applied Physics, 2003
- Transient enhanced diffusion of implanted boron in 4H-silicon carbideApplied Physics Letters, 2000
- Dopant activation and surface morphology of ion implanted 4H- and 6H-silicon carbideJournal of Electronic Materials, 1998
- Deep Level Transient Fourier Spectroscopy (DLTFS)—A technique for the analysis of deep level propertiesSolid-State Electronics, 1988