Electrothermal actuation based on carbon nanotube network in silicone elastomer
Authors:
- 30 June 2008
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 92 (26) , 263104
Abstract
The authors report an electrothermal actuator, which is fabricated by involving carbon nanotube network into the silicone elastomer. The actuators exhibit excellent performances as good as normal dielectric elastomer actuators while working under much lower voltages (e.g., 1.5Vmm−1). They are longitudinal actuators and there is no need for stacking or rolling sheets of materials. In addition, they can satisfy the demand of different voltage applications ranging from dozens of voltages to thousands of voltages by using different carbon nanotube loading composites. Visible maximal strain of 4.4% occurs at an electric power intensity around 0.03Wmm−3.Keywords
This publication has 18 references indexed in Scilit:
- Dielectric elastomers as next-generation polymeric actuatorsSoft Matter, 2007
- Interpenetrating networks of elastomers exhibiting 300% electrically-induced area strainSmart Materials and Structures, 2007
- Nonlinear electrical conducting behavior of carbon nanotube networks in silicone elastomerApplied Physics Letters, 2007
- Effect of nanotube alignment on percolation conductivity in carbon nanotube/polymer compositesPhysical Review B, 2005
- Very Low Conductivity Threshold in Bulk Isotropic Single‐Walled Carbon Nanotube–Epoxy CompositesAdvanced Materials, 2005
- Thermal conductivity improvement of silicone elastomer with carbon nanotube loadingApplied Physics Letters, 2004
- Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges, Second Edition2004
- Electroactive Polymers as Artificial Muscles: A ReviewJournal of Spacecraft and Rockets, 2002
- High-Speed Electrically Actuated Elastomers with Strain Greater Than 100%Science, 2000
- Conducting polymer artificial musclesSynthetic Metals, 1996