Catalytic Decomposition of an Organic Electrolyte to Methane by a Cu Complex-Derived In Situ CO2 Reduction Catalyst
Open Access
- 27 October 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (44) , 41792-41801
Abstract
Metal complexes are often transformed to metal complex-derived catalysts during electrochemical CO2 reduction, enhancing the catalytic performance of CO2 reduction or changing product selectivity. To date, it has not been investigated whether metal-complex derived catalysts also enhance the decomposition of the solvent/electrolyte components as compared to an uncoated electrode. Here, we tested the electrochemical stability of five organic solvent-based electrolytes with and without a Cu complex-derived catalyst on carbon paper in an inert atmosphere. The amount of methane and hydrogen produced was monitored using gas chromatography. Importantly, the onset potential for methane production was reduced by 300 mV in the presence of a Cu complex-derived catalyst leading to a significant amount of methane (417.7 ppm) produced at -2.17 V vs Fc/Fc+ in acetonitrile. This suggests that the Cu complex-derived catalyst accelerated not only CO2 reduction but also the reduction of the electrolyte components. This means that Faradaic efficiency (FE) measurements under CO2 in acetonitrile may significantly overestimate the amount of CH4. Only 28.8 ppm of methane was produced in dimethylformamide under an inert atmosphere, much lower than that produced under CO2 (506 ppm under CO2) at the same potential, suggesting that dimethylformamide is a more suitable solvent. Measurements in propylene carbonate produced mostly hydrogen gas while in dimethyl sulfoxide and 3-methoxypropionitrile neither methane nor hydrogen was detected. A strong linear correlation between the measured current and the amount of methane produced with and without the Cu complex-derived catalyst confirmed that the origin of methane production is solvent/electrolyte decomposition and not the decomposition of the catalyst itself. The study highlights that in a nonaqueous system, highly active catalyst in situ deposited during electrochemical testing can significantly influence background measurements as compared to uncoated electrodes, therefore the choice of solvent is paramount for reliable testing.Keywords
Funding Information
- Centre of Excellence for Electromaterials Science, Australian Research Council (CE 140100012)
This publication has 32 references indexed in Scilit:
- Catalysis by electrons and holes: formal potential scales and preparative organic electrochemistryOrganic Chemistry Frontiers, 2015
- Activity Descriptors for CO2 Electroreduction to Methane on Transition-Metal CatalystsThe Journal of Physical Chemistry Letters, 2012
- Re(bipy-tBu)(CO)3Cl−improved Catalytic Activity for Reduction of Carbon Dioxide: IR-Spectroelectrochemical and Mechanistic StudiesInorganic Chemistry, 2010
- Enhancement of Toluene Formation by Water during Electrolysis of Chlorobenzene at Pt Electrode in AcetonitrileElectrochemistry, 2007
- “Deactivation of copper electrode” in electrochemical reduction of CO2Electrochimica Acta, 2005
- Electrochemical Properties of Organic Liquid Electrolytes Based on Quaternary Onium Salts for Electrical Double‐Layer CapacitorsJournal of the Electrochemical Society, 1994
- Ligand participation in the reduction of CO2 catalyzed by complexes of 1,10 o-phenanthrolineElectrochimica Acta, 1988
- Anodic and cathodic reactions in acetonitrile/tetra-n-butylammonium tetrafluoroborate: an electrochemical and infrared spectroelectrochemical studyCanadian Journal of Chemistry, 1988
- Reductions in aprotic media—I. Cathodic reduction limits at a platinum electrode in acetonitrileElectrochimica Acta, 1982
- The behaviour of high polar organic solvents at platinum electrode — II. Adsorption and electrode reactions of acetonitrileElectrochimica Acta, 1980