Study on High Temperature Resistant Packaging of Ultra High Temperature Fabry–Perot Optical Fibre Vibration Sensor
Authors:
- 4 October 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (23) , 27045-27050
Abstract
Thermal stress failure is the bottleneck that is restricting the development of ultra-high temperature sensors, and reliable packaging is crucial in their development process. In this paper, a two-step packaging structure was proposed for the high temperature resistant failure packaging challenges of the ultra-high temperature Fabry–Perot optical fibre vibration sensor. First, a high temperature resistant AlN base was selected according to thermal simulation. A reliable bond between the AlN base and the 6H-SiC vibration-sensitive element was designed, which could effectively avoid the failure of thermomechanical stress adaptation during drastic temperature change. In addition, a high temperature resistant ZrO 2 support tube with a length of 20 cm, an outer diameter of 16 mm, and an inner diameter of 12 mm was designed as the optical fibre lead-out support structure by using finite element simulation and optimisation. Moreover, the influence of fastening fixtures on the sensor mode was analysed. The simulated first-order resonance frequency of the sensor was 2644.9 Hz, while the actual measurement was 2620 Hz. The difference was only 0.9%. Finally, the validity of the design was verified by experiments, and the sensor achieved reliable operation at 1200 °C.Keywords
Funding Information
- National Natural Science Foundation of China (62103025)
- National Natural Science Foundation of China (51925501)
This publication has 26 references indexed in Scilit:
- Vibration frequency measurement using a local multithreshold techniqueOptics Express, 2013
- Design, fabrication and characterization of high temperature piezoelectric vibration sensor using YCOB crystalsSensors and Actuators A: Physical, 2012
- Interferometric Fiber Optic SensorsSensors, 2012
- Fiber Bragg Grating Sensors for Harsh EnvironmentsSensors, 2012
- Development and Testing of High-temperature Piezoelectric Wafer Active Sensors for Extreme EnvironmentsStructural Health Monitoring, 2010
- Experimental studies on fiber optic sensors embedded in concreteMeasurement, 2010
- Characterization of piezoelectric single crystal YCa4O(BO3)3 for high temperature applicationsApplied Physics Letters, 2008
- Vibration displacement measurements based on a polarimetric extrinsic fibre Fabry Perot interferometerMeasurement Science and Technology, 2003
- High-sensitivity fiber-optic accelerometerOptics Letters, 1989
- A simple fibre Fabry-Perot sensorOptics Communications, 1983