Investigation of Microstructure and Texture Evolution in an AZ31/Mg–Gd Alloy Hybrid Metal Fabricated by High‐Pressure Torsion
Authors:
- 3 February 2023
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (11)
Abstract
High‐pressure torsion (HPT) processing is successfully applied to fabricate a novel hybrid material from separate discs of AZ31 (Mg–3Al–1Zn, wt%) and Mg–0.6Gd (wt%) alloys by straining through numbers of rotations, N, of 1/4, 1/2, 5, 10, and 20 turns at room temperature. The microstructure and texture are investigated near the bonding interface through the disc diameter using electron backscatter diffraction (EBSD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The microstructure exhibits two grain refinement regimes with the first occurring during an equivalent strain range, εeq, of ≈0.3–72 and the second during εeq from ≈72 to 517. The general texture changes from B‐fiber to Y‐fiber and C2‐fiber through the HPT processing. The resultant microstructures and textures of this hybrid alloy are examined separately for the AZ31 and Mg‐0.6Gd alloys and found controlled by the presence of twinning, slip systems, and second phases and the occurrence of different dynamic recrystallization mechanisms.Keywords
Funding Information
- H2020 European Research Council (267464-SPDMETALS)
This publication has 64 references indexed in Scilit:
- Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsionActa Materialia, 2012
- Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsionMaterials Science and Engineering: A, 2011
- Critical strain for mechanical alloying of Cu–Ag, Cu–Ni and Cu–Zr by high-pressure torsionScripta Materialia, 2011
- The Relation between Shear Banding, Microstructure and Mechanical Properties in Mg and Mg-Y AlloysMaterials Science Forum, 2011
- The significance of slippage in processing by high-pressure torsionScripta Materialia, 2009
- A novel pole figure inversion method: specification of theMTEXalgorithmJournal of Applied Crystallography, 2008
- Structural refinement of low alloyed steels during severe plastic deformationMaterials Science and Engineering: A, 2004
- Deformation microstructures and textures of some cold rolled Mg alloysMaterials Science and Engineering: A, 2004
- Dynamic Recrystallization Based on Twinning in Coarse-Grained MgMaterials Science Forum, 2003
- MagnesiumMaterials Science and Engineering: A, 2001