Bending Behavior of Steel Pipe Girders Filled with Ultralight Mortar
Authors:
- 1 May 2004
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 9 (3) , 297-303
Abstract
Bending behavior of steel pipes filled with ultralight mortar was studied by bending tests using a steel pipe, steel pipes filled with ultralight mortar, and steel pipes filled with light aggregate concrete and normal concrete. The steel pipe model filled with normal concrete had 1.8 times higher bending strength than the steel pipe model. The bending behavior of the steel pipe filled model with ultralight mortar was not improved when the compressive strength of the ultralight mortar was less than 1 MPa. However, ductility was much improved when the compressive strength was over 5 MPa, and the ultimate steel strain was more than double of the steel pipe model. The strains of steel and concrete in all the models were proportional to the distance from the neutral axis until the steel plate yielded. A simple analytical method was proposed to calculate the bending moments of the ultralight mortar filled steel pipes. The calculated values agreed very well with the test results.Keywords
This publication has 2 references indexed in Scilit:
- New Structural Forms for Steel/Concrete Composite BridgesStructural Engineering International, 2000
- Theoretical Stress‐Strain Model for Confined ConcreteJournal of Structural Engineering, 1988