An Impedance Model for EIS Analysis of Nickel Metal Hydride Batteries
Authors:
Open Access
- 6 May 2017
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (7) , A1446-A1453
Abstract
Based on fundamental electrochemical theory, an impedance model for analysis of electrochemical impedance spectroscopy (EIS) of Nickel-Metal Hydride (NiMH) batteries is presented in this study. The resulting analytical expression is analogous to the impedance response of the Randles electrical circuit used for EIS analysis on NiMH batteries. The impedance model is validated against EIS measurements carried out whilst decreasing the state of charge (SOC) of a NiMH battery pack. The diffusion mechanisms during the discharge of the NiMH battery is modelled through a Warburg element derived from diffusion theory considering reflective boundary conditions. ZView Scribner Associates Inc. software allowed the estimation of electrochemical and diffusion parameters from EIS measurements of the NiMH battery. The effect of diffusion mechanisms on EIS measurements is discussed. The results demonstrate that ion transport is the rate-limiting process during the discharge of the NiMH battery. This EIS-modelling study has provided an insight into the interpretation of battery electrochemical mechanisms represented in the Nyquist plot from EIS. It can assist to further EIS-modelling to study and correlate State of Health (SOH) in NiMH batteries for different applications.Keywords
This publication has 36 references indexed in Scilit:
- Inductive Effect on the Fuel Cell Cathode Impedance Spectrum at High FrequenciesJournal of Fuel Cell Science and Technology, 2012
- Modelling Ni-mH battery using Cauer and Foster structuresJournal of Power Sources, 2006
- Cell Impedance Measurement by Laplace Transformation of Charge or Discharge Current–VoltageJournal of the Electrochemical Society, 2006
- Equivalent circuit parameters of nickel/metal hydride batteries from sparse impedance measurementsJournal of Power Sources, 2004
- Monitoring state-of-charge of Ni–MH and Ni–Cd batteries using impedance spectroscopyJournal of Power Sources, 2004
- Technical Note: Concerning the Conversion of the Constant Phase Element Parameter Y into a CapacitanceCorrosion, 2001
- AC impedance and state-of-charge analysis of a sealed lithium-ion rechargeable batteryJournal of Solid State Electrochemistry, 1999
- Modeling discharge and charge characteristics of nickel–metal hydride batteriesElectrochimica Acta, 1999
- An electrochemical impedance spectroscopy method for prediction of the state of charge of a nickel-metal hydride battery at open circuit and during dischargeJournal of Power Sources, 1998
- Impedance parameters and the state-of-charge. II. Lead-acid batteryJournal of Applied Electrochemistry, 1979