Firing Tests on Clay-Rich Raw Materials from the Algarve Basin (Southern Portugal): Study of Mineral Transformations with Temperature
- 1 April 2010
- journal article
- Published by Cambridge University Press (CUP) in Clays and Clay Minerals
- Vol. 58 (2) , 188-204
Abstract
In cases where the provenance of raw materials used in the manufacture of local archeological ceramics is of interest, a detailed study of thermal transformations of minerals may be useful. The purpose of this study was to measure mineralogical transformations of different types of clays obtained during experimental firing runs, carried out at different temperatures, with the main goal of establishing Algarve reference groups based on the composition of raw material and high-temperature mineralogy, which may be compared with ceramics in studies of provenance. Eleven samples of clay-rich raw materials from the Algarve Basin (southern Portugal) were fired to temperatures ranging from 300 to 1100°C in increments of 100°C under oxidizing conditions. These were chosen to have variable chemical and mineralogical compositions, representing the main compositional range of the clay deposits from the region. Mineralogical and geochemical characterizations of the original clays were carried out by X-ray diffraction (XRD) and X-ray fluorescence (XRF), respectively. Mineral transformations on the fired products were also studied by XRD.Three groups of clays were distinguished according to the type of neoformed high-temperature minerals: (1) non-calcareous clays; (2) clays containing calcite as the only carbonate; and (3) clays with dolomite or dolomite + calcite. Firing of non-calcareous clays produced mullite at 1100–1200°C. Gehlenite and wollastonite formed by firing calcite-rich clays above 900°C, accompanied by anorthite or larnite in samples with small or large calcite contents, respectively. Firing of dolomite-rich clays at temperatures >900°C yielded a member of the gehlenite-åkermanite group and diopside. Anorthite, enstatite, periclase, forsterite, and monticellite may also form in the firing products.Keywords
This publication has 26 references indexed in Scilit:
- Mineralogical transformations of calcareous rich clays with firing: A comparative study between calcite and dolomite rich clays from Algarve, PortugalApplied Clay Science, 2009
- Holocene sea level fluctuations and coastal evolution in the central Algarve (southern Portugal)Marine Geology, 2007
- The use of illitic clays in the production of stoneware tile ceramicsApplied Clay Science, 2006
- The change of phase composition in kaolinite- and illite-rich clay-based ceramic bodiesApplied Clay Science, 2004
- Clay minerals from the sedimentary cover from the Northwest Iberian shelfProgress in Oceanography, 2002
- Archaeological Ceramic Materials1999
- Firing process of natural clays. Some microtextures and related phase compositionsThermochimica Acta, 1998
- Thermal analysis as a method of characterizing ancient ceramic technologiesThermochimica Acta, 1995
- Metamorphic Evolution of the South Portuguese/Pulo Do Lobo Zone1990
- Stratigraphy and Synsedimentary Tectonism1990