Performance Study of a Bladeless Microturbine
Open Access
Abstract
The paper presents a comprehensive numerical and experimental analysis of the Tesla turbine. The turbine rotor had 5 discs with 160 mm in diameter and inter-disc gap equal to 0.75 mm. The nozzle apparatus consisted of 4 diverging nozzles with 2.85 mm in height of minimal cross-section. The investigations were carried out on air in subsonic flow regime for three pressure ratios: 1.4, 1.6 and 1.88. Maximal generated power was equal to 126 W and all power characteristics were in good agreement with numerical calculations. For each pressure ratio, maximal efficiency was approximately the same in the experiment, although numerical methods proved that efficiency slightly dropped with the increase of pressure ratio. Measurements included pressure distribution in the plenum chamber and tip clearance and temperature drop between the turbine’s inlet and the outlet. For each pressure ratio, the lowest value of the total temperature marked the highest efficiency of the turbine, although the lowest static temperature was shifted towards higher rotational speeds. The turbine efficiency could surpass 20% assuming the elimination of the impact of the lateral gaps between the discs and the casing. The presented data can be used as a benchmark for the validation of analytical and numerical models.Keywords
Funding Information
- Narodowe Centrum Nauki (UMO-2019/35/B/ST8/01871)
This publication has 38 references indexed in Scilit:
- Balancing responsibilities: Effects of growth of variable renewable energy, storage, and undue grid interactionEnergy Policy, 2020
- Comparison of methods for the determination of Tesla turbine performanceJournal of Theoretical and Applied Mechanics, 2019
- A recent review of waste heat recovery by Organic Rankine CycleApplied Thermal Engineering, 2018
- A review of expanders for power generation in small-scale organic Rankine cycle systems: Performance and operational aspectsProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2016
- Trends of changes in the power generation system structure and their impact on the system reliabilityEnergy, 2015
- Influence of geometry on the efficiency of convergent–divergent nozzles applied to Tesla turbinesExperimental Thermal and Fluid Science, 2015
- Review of organic Rankine cycles for internal combustion engine exhaust waste heat recoveryApplied Thermal Engineering, 2013
- Assessment of Tesla Turbine Performance for Small Scale Rankine Combined Heat and Power SystemsJournal of Engineering for Gas Turbines and Power, 2010
- Experiment and analysis for an improved design of the inlet and nozzle in Tesla disc turbinesProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2010
- Laminar Inward Flow of an Incompressible Fluid Between Rotating Disks, With Full Peripheral AdmissionJournal of Applied Mechanics, 1968