Molecular weight dependence of the fracture toughness of glassy polymers arising from crack propagation through a craze
Authors:
- 1 March 1995
- journal article
- Published by Wiley in Polymer Engineering & Science
- Vol. 35 (5) , 419-425
Abstract
We investigate criteria for craze failure at a crack tip and the dependence of craze failure on the molecular weight of the polymer. Our micromechanics model is based on the presence of cross‐tie fibrils in the craze microstructure. These cross‐tie fibrils give the craze some small lateral load bearing capacity so that they can transfer stress between the main fibrils. This load transfer mechanism allows the normal stress on the fibrils directly ahead of the crack tip in the center of the craze to reach the breaking stress of the polymer chains. We solve for stress field near the crack trip and use it to relate craze failure to the external loading and microstructural quantities such as the craze widening (drawing) stress, the fibril spacing, the molecular weight, and the force to break a single polymer chain. The relationship between energy flow to the crack tip due to external loading and the work of local fracture by fibril breakdown is also obtained. Our analysis shows that the normal stress acting on the fibrils at the crack tip increases linearly as the square root of the craze thickness, assuming that the normal stress distribution is uniform and is equal to the drawing stress acting on the craze‐bulk interface. The critical crack opening displacement, and hence the fracture toghness is shown to be proportional to [1–(Me/qMn)]2, where Me is the entanglement molecular weight, Mn is the number average molecular weight of polymer before crazing, and q is the fraction of entangled strands that do not undergo chain scission in forming the craze.Keywords
This publication has 12 references indexed in Scilit:
- Micromechanics of crack growth into a craze in a polymer glassMacromolecules, 1992
- A molecular interpretation of the toughness of glassy polymersMacromolecules, 1991
- Measurements of the craze-bulk interfacial active zoneJournal of Materials Science, 1991
- Microstructure and origin of cross-tie fibrils in crazesJournal of Materials Science, 1991
- Relationship between craze microstructure and molecular entanglements in glassy polymers. 1Macromolecules, 1989
- Craze fibril stability and breakdown in polystyreneMacromolecules, 1986
- Craze failure by midrib creepPolymer Engineering & Science, 1984
- A distributed dislocation stress analysis for crazes and plastic zones at crack tipsJournal of Materials Science, 1982
- Microscopic mechanisms and mechanics of craze growth and fracturePhilosophical Magazine A, 1979
- Yielding of steel sheets containing slitsJournal of the Mechanics and Physics of Solids, 1960