Fracture Toughness of Microplasma‐Sprayed Hydroxyapatite Coating by Nanoindentation
- 2 May 2011
- journal article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 8 (3) , 572-590
Abstract
We report the fracture toughness ( K I c ) measured by nanoindentation technique at five different loads in the range of 100–1000 mN on the cross section of a highly porous microplasma‐sprayed hydroxyapatite (MIPS‐HAP) coating. The unique advantage of this technique was that it could evaluate K I c at a scale comparable with that of the local microstructure of the coating. In spite of high porosity (∼11 vol%), the coating showed a toughness (∼0.6 MPa m 0.5 ) comparable to typical literature data (∼0.5 MPa m 0.5 ) on dense HAP coating. Scanning electron microscopy of nanoindents suggested some plausible reasons for achieving a relatively higher toughness in the coating.Keywords
This publication has 76 references indexed in Scilit:
- Characterization of Microplasma Sprayed Hydroxyapatite CoatingJournal of Thermal Spray Technology, 2009
- Nanoindentation study of microplasma sprayed hydroxyapatite coatingCeramics International, 2009
- Weibull modulus of nano-hardness and elastic modulus of hydroxyapatite coatingJournal of Materials Science, 2009
- Fracture toughness of carbides in tool steels evaluated by nanoindentationActa Materialia, 2007
- Measurement of the microstructural fracture toughness of cortical bone using indentation fractureJournal of Biomechanics, 2007
- Study on the influence of plasma spray processes and spray parameters on the structure and crystallinity of hydroxylapatite coatingsMaterialwissenschaft und Werkstofftechnik, 2006
- Controlled failure mechanisms toughen the dentino-enamel junction zoneThe Journal of Prosthetic Dentistry, 2005
- Fracture toughness, adhesion and mechanical properties of low-K dielectric thin films measured by nanoindentationThin Solid Films, 2003
- Elastic modulus, indentation pressure and fracture toughness of hybrid coatings on glassThin Solid Films, 2000
- Measurement of mechanical properties by ultra-low load indentationMaterials Science and Engineering: A, 1998