Wear Behavior of Spindles of Cotton Picker in Field Work
- 3 August 2020
- journal article
- research article
- Published by ASME International in Journal of Tribology
- Vol. 143 (2) , 1-23
Abstract
Spindles in cotton picking machinery are the key component, wear of the spindles significantly reduces harvest efficiency of the cotton picking process. To improve its wear resistance, the substrate surfaces of spindles are usually electroplated with chromium coating. But the failure process and wear mechanism of the spindle have not been studied so far. In this paper, based on the surface analyses and wear behavior of spindles of a cotton picker in field work, the test results showed that the worn surface was smoother and wear trend of surface topographies tend to consistent along with the rotation direction of the spindle and found a significant reduction in roughness and coating thickness. The coating of the spindle surface has not been damaged in the picking process, the wear mechanism was mainly abrasive wear. After the worn out of surface coating, abrasive wear is always present accompanied by oxidation wear. Multi-oxides were deposited on the substrate surface; the oxide particle was sheared by cotton fiber in the subsequent picking, leading to an increase in surface roughness and aggravating substrate wear. These in filed wear mechanisms and processes of spindles could be of help for the design and surface modification with longer working life.Keywords
Funding Information
- Xinjiang Production and Construction Corps (2018AB007)
- National Natural Science Foundation of China (11362020)
This publication has 20 references indexed in Scilit:
- Influence of surface texturing and hard chromium coating on the wear of steels used in cold rolling mill rollsWear, 2013
- Surface morphology in engineering applications: Influence of roughness on sliding and wear in dry frettingTribology International, 2011
- Application of CrAlN coatings on carbide substrates in routing of MDFWear, 2007
- The correlation between the hardness and tribological behaviour of electroplated chromium coatings sliding against ceramic and steel counterpartsSurface and Coatings Technology, 2006
- Influence of chromium carbide coating on tribological performance of steelMaterials & Design (1980-2015), 2006
- Wear studies of (Ti–Al)N coatings deposited by reactive magnetron sputteringWear, 2005
- Effect of contact pressure on wear resistance of AISI H13 tool steels with chromium nitride and hard chromium coatingsSurface and Coatings Technology, 2002
- Hard chromium plating of EDT mill work rollsJournal of Materials Processing Technology, 1999
- Effect of tribofilm formation on the tribological performance of hydrogenated carbon coatingsSurface and Coatings Technology, 1996
- Wear-resistant coatings for cermet cutting toolsSurface and Coatings Technology, 1995