Tunable high-finesse InP/air MOEMS filter
Authors:
- O. ParillaudOPO. Parillaud
- 20 June 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 17 (7) , 1471-1473
Abstract
We have fabricated Fabry-Pe/spl acute/rot tunable filters based on a multi-air-gap/InP suspended structure. High spectral selectivity is achieved by displacing the resonant cavity into the high index material rather than in air. This configuration reduces the lateral losses of the cavity. The filters feature a bidirectional electrostatic actuation. A spectral linewidth better than 0.15 nm over a tuning range of 40 nm is experimentally demonstrated.Keywords
This publication has 9 references indexed in Scilit:
- Fabrication of ultrathin and highly flexible InP-based membranes for microoptoelectromechanical systems at 1.55 /spl mu/mIEEE Photonics Technology Letters, 2005
- Low-cost electrothermally tunable optical microcavities based on GaAsIEEE Photonics Technology Letters, 2002
- Record tuning range of InP-based multiple air-gap MOEMS filterElectronics Letters, 2002
- III–V semiconductor material for tunable Fabry–Perot filters for coarse and dense WDM systemsSensors and Actuators A: Physical, 2000
- Microelectromechanical tunable filter with stablehalf symmetric cavityElectronics Letters, 1998
- Highly selective and widely tunable 1.55-μm InP/air-gap micromachined Fabry-Perot filter for optical communicationsIEEE Photonics Technology Letters, 1998
- Surface micromachined Fabry-Perot tunable filterIEEE Photonics Technology Letters, 1996
- Vertical coupled-cavity microinterferometer on GaAs with deformable-membrane top mirrorIEEE Photonics Technology Letters, 1995
- GaAs micromachined widely tunable Fabry-Perot filtersElectronics Letters, 1995