Experimental Investigation of Corrosion Resistance of Anodized Aluminum Alloys of 1100, 5083‐O, and 6063 Types
Open Access
- 1 January 2026
- journal article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2026 (1)
Abstract
The corrosion resistance of Al alloys is significant for their use in marine, structural, and transportation applications where long‐term durability in chloride‐rich environments is required. This study investigates the anodic oxide film formation and corrosion behavior of representative aluminum alloys of 1100, 5083‐O, and 6063 types, after being anodized in an electrolyte of 0.89M (NH 4 ) 2 SO 4 and 0.54M NH 4 F, with and without 5 wt% ethylene glycol (EG). Anodizing was conducted for 1 and 3 h, followed by dichromate sealing. Optical microscopy exhibited that EG suppresses fluoride‐induced localized dissolution, producing smoother and more compact porous films, whereas non‐EG electrolytes promoted pore merging, particularly in Mg‐rich alloys. Potentiodynamic polarization and EIS revealed alloy‐ and time‐dependent corrosion responses. AA1100 exhibited superior barrier properties with EG‐assisted anodizing at short durations, while the long‐term stability is governed by the imposed anodization conditions. AA5083‐O demonstrated enhanced corrosion resistance without EG, attributed to aggressive fluoride etching and effective sealing. It is noted that EG improved early stage corrosion resistance, whereas prolonged immersion favored non‐EG coatings due to stabilization by corrosion products for AA6063. Hardness measurements indicated postcorrosion strengthening from in situ formation of boehmite and hydrated alumina. Hence, optimized corrosion performance depends on anodizing chemistry, alloy composition, and treatment duration.Keywords
This publication has 34 references indexed in Scilit:
- Improving the cavitation erosion resistance of 6061 aluminum alloy via an anodized film composed of hard particlesJournal of Materials Science, 2025
- Dual enhancement of wear and corrosion resistance in aluminum alloy anodic oxide films through glycerol additionApplied Surface Science, 2025
- Improving the cavitation corrosion resistance of 6061 aluminum alloy by anodizingElectrochimica Acta, 2024
- The use of aluminum alloys in structures: Review and outlookStructures, 2023
- Systematic microstructure modification effect on nanomechanical, tribology, corrosion, and biomineralization behavior by optimized anodic alumina nanotubes coated Ti–6Al–4V alloyCeramics International, 2023
- Influence of adjusting the anodizing and aging sequences on the microstructure, fatigue property and corrosion resistance of anodized AA6082 alloysMaterials Characterization, 2022
- Effects of graphene oxide-filled sol-gel sealing on the corrosion resistance and paint adhesion of anodized aluminumApplied Surface Science, 2019
- Tribological Properties of the Oxide Coatings Produced onto 6061-T6 Aluminum Alloy in the Hard Anodizing ProcessJournal of Materials Engineering and Performance, 2018
- Effects of residual water in the pores of aluminum anodic oxide layers prior to sealing on corrosion resistanceApplied Surface Science, 2013
- Application of modern aluminum alloys to aircraftProgress in Aerospace Sciences, 1996