Effect of Tip Configurations on Aerodynamic Performance of Variable Geometry Linear Turbine Cascade
- 25 February 2017
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Journal of Turbo & Jet-Engines
- Vol. 36 (4) , 457-470
Abstract
The variable geometry turbine (VGT) has been widely used in different fields due to its higher efficiency and lower fuel consumption at part-load. However, the flow field in a VGT is characterized by the leakage flow through the radial clearance of rotational vane compared with a general fixed vane turbine. Numerical simulations are conducted on a linear turbine cascade to reduce the leakage flow based on passive control method. The aerodynamic performances and flow fields are compared for four kinds of tip configuration firstly. Then, the effect of variable geometry on the linear turbine cascade aerodynamic performance is investigated for five installation angles ranging from –5 to 5 deg. In addition, the development patterns and trends of the tip leakage vortex and the passage vortex are analyzed. The results show that the squealer tip and the rotating axis have a significant impact on suppressing leakage flow. The leakage flow rate has a tendency to decrease, and the total pressure coefficient is gradually increased when installation angle ranges from –5 to 5 deg. The interactions between tip leakage vortex and passage vortex leads to the different trends on leakage flow at various installation angles and axial sections.Keywords
This publication has 12 references indexed in Scilit:
- Development and validation of a radial variable geometry turbine model for transient pulsating flow applicationsEnergy Conversion and Management, 2014
- Variable geometry gas turbines for improving the part-load performance of marine combined cycles – Combined cycle performanceApplied Thermal Engineering, 2011
- Variable geometry gas turbines for improving the part-load performance of marine combined cycles – Gas turbine performanceEnergy, 2010
- Variable Geometry Mixed Flow Turbine for Turbochargers: An Experimental StudyInternational Journal of Fluid Machinery and Systems, 2008
- Analysis of Some Improved Blade Tip ConceptsJournal of Turbomachinery, 2005
- Tip Leakage Flows Near Partial Squealer Rims in an Axial Flow Turbine Stage2003
- Effect of Squealer Geometry Arrangement on a Gas Turbine Blade Tip Heat TransferJournal of Heat Transfer, 2002
- Effect of Squealer Tip on Rotor Heat Transfer and EfficiencyJournal of Turbomachinery, 1998
- Flow and Heat Transfer in Turbine Tip GapsJournal of Turbomachinery, 1989
- Endwall Flow/Loss Mechanisms in a Linear Turbine Cascade With Blade Tip ClearanceJournal of Turbomachinery, 1989