Effect of aging on the morphology of bitumen by atomic force microscopy
Authors:
- 15 December 2011
- journal article
- Published by Wiley in Journal of Microscopy
- Vol. 246 (1) , 11-19
Abstract
Summary: Effect of aging on the morphology of bitumen was investigated. Two bitumens were aged according to the thin film oven test (TFOT), pressure aging vessel (PAV) test and ultraviolet (UV) radiation, respectively. The morphology of the binders before and after aging was characterized by atomic force microscopy. The physical properties and chemical compositions of the binders were also measured. The results showed that aging affected the bitumen morphology significantly. Aging increased the overall surface stiffness of the bitumen and made the bitumen surface more solid‐like. The extent of these changes was dependent on aging conditions. TFOT decreased the contrast between the dispersed domains and the matrix, which contributed to the single‐phase trend of the binders. The effect of PAV aging on morphology of the binders was dependent on the base bitumen. In one case, it further accelerated the single‐phase trend of bitumen in comparison with that after TFOT. In the other case, it caused the phase separation of bitumen. In both cases, PAV aging increased the surface roughness of the binders obviously. As a result of UV aging, the contrast between the matrix phase and dispersed phase was increased due to the difference in sensitivity to UV radiation of the bitumen molecules, which caused or further promoted the phase separation in the binders. Regardless of the aging procedure carried out, a strong correlation was observed between the changes in morphology and physical properties as well as chemical compositions of the binders before and after aging.Keywords
This publication has 15 references indexed in Scilit:
- Influence of sodium and organo-montmorillonites on the properties of bitumenApplied Clay Science, 2010
- Laboratory evaluation of the effects of short-term oven aging on asphalt binders in asphalt mixtures using HP-GPCConstruction and Building Materials, 2009
- The influence of UV aging of a Styrene/Butadiene/Styrene modified bitumen: Comparison between laboratory and on site agingFuel, 2007
- Bitumen morphologies by phase‐detection atomic force microscopyJournal of Microscopy, 2006
- Effect of the thermal degradation of SBS copolymers during the ageing of modified asphaltsPolymer Degradation and Stability, 2004
- Polymer Weathering: Photo-OxidationJournal of Polymers and the Environment, 2002
- Effect of ageing on bitumen chemistry and rheologyConstruction and Building Materials, 2002
- Comparison by Fourier transform infrared (FTIR) spectroscopy of different ageing techniques: application to road bitumensFuel, 2001
- Bitumen in colloid science: a chemical, structural and rheological approachFuel, 1998
- New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopyJournal of Microscopy, 1996