Reply on RC1
Open Access
- 25 February 2025
- other
- Published by Copernicus GmbH
- Vol. 2024, 1-19
Abstract
Modelling debris flow propagation requires numerical models able to describe the main characteristics of the flow, like velocity or inundation extent. Due to the complex physics involved, every numerical model is dependent from a set of parameters whose influence on the results is often not evident. In this contribution we propose simple analytical solutions based on the monophasic Shallow Water Equations for some of the most used rheological models (O'Brien & Julien, Voellmy, Bingham and Bagnold) implemented in monophasic (FLO-2D, RAMMS, HEC-RAS, TELEMAC-2D) and biphasic commercial software (TRENT2D). These simplified solutions and their asymptotic uniform-flow like relationship are useful on one hand to speed up the calibration process, limiting the need to perform multiple simulations with unrealistic set of parameters and on the other hand as a benchmark for existing numerical methods. To further guide the calibration, a Sobol's sensitivity analysis has been performed to highlight which parameters of the considered equations have the most influence on the flow velocity. Finally, as an example of application, the proposed methodology is validated on a real debris flow event occurred in Italy.Keywords
This publication has 43 references indexed in Scilit:
- Physical vulnerability curve construction and quantitative risk assessment of a typhoon-triggered debris flow via numerical simulation: A case study of Zhejiang Province, SE ChinaLandslides, 2024
- Deposition areas: An effective solution for the reduction of the sediment volume transported by stony debris flows on the high‐sloping reach of channels incising fans and debris conesEarth Surface Processes and Landforms, 2023
- Coarse‐grained debris flow dynamics on erodible bedsJournal of Geophysical Research: Earth Surface, 2017
- Numerical modelling of gravel unconstrained flow experiments with the DAN3D and RASH3D codesComputers & Geosciences, 2015
- Comparison between FLO-2D and Debris-2D on the application of assessment of granular debris flow hazards with case studyJournal of Mountain Science, 2013
- Two-dimensional simulation of debris flows in erodible channelsComputers & Geosciences, 2009
- Application of FLATModel, a 2D finite volume code, to debris flows in the northeastern part of the Iberian PeninsulaLandslides, 2007
- Field observations, rheological testing and numerical modelling of a debris‐flow eventEarth Surface Processes and Landforms, 2006
- Comparison of 2D debris-flow simulation models with field eventsComputational Geosciences, 2006
- Determining rheological parameters of debris flow materialGeomorphology, 1991