Effects of CNT and MgO–Type Expansive Agent on the Cracking Resistance of Face-Slab Concrete of CFRD
Authors:
- 1 December 2022
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 34 (12) , 04022331
Abstract
Concrete face rockfill dam (CFRD) is a commonly used and cost-effective type of dams. However, random cracks are often seen in the face slab concrete (FSC) of a CFRD during construction, largely due to the shrinkage caused by concrete temperature gradients, drying, and cementitious hydration. This study aims to improve the cracking resistance of FSC by using shrinkage compensating and cracking control materials. In this study, 5.0% by weight MgO-type expansive agent (MEA) or 0.1% by weight carbon nanotube (CNT) was added to a reference FSC (FSC-REF) selected from a CFRD. Fresh and hardened state properties of the developed concrete were tested. Different properties such as hydration heat, capillary pressure, mechanical properties at various ages, drying and autogenous shrinkage, thermal expansion coefficient (CTE), pore structure, and cracking resistance at early age of the FSC mixes (FSC-REF, FSC-MgO, and FSC-CNT) were determined. The results showed that the CNT addition lowered the capillary pressure and reduced the risk of plastic shrinkage cracking, while it also reduced drying and autogenous shrinkage of FSC. The addition of both CNT and MgO had little influence on the heat of hydration of FSC, but these slightly improved the axial tensile properties of FSC. CNT reduced the thermal expansion coefficient of FSC, whereas MgO increased it. Both CNT and MgO decreased the total porosity of the FSC, and the CNT addition significantly reduced the number of mesopores. The temperature-stress test results showed that MgO/CNT improved the cracking resistance of the FSC at early age under both temperature matching curing mode and constant temperature curing mode. Based on measured properties, CNT can be considered a promising additive for cracking control of FSC.Keywords
This publication has 35 references indexed in Scilit:
- Heat evolution during the hydration of Portland cement in the presence of fly ash, calcium hydroxide and super plasticizerThermochimica Acta, 2012
- Micromechanical modeling on autogenous and drying shrinkages of concreteConstruction and Building Materials, 2012
- Settlement analysis of the Shuibuya concrete-face rockfill damComputers and Geotechnics, 2011
- Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materialsApplied Surface Science, 2011
- Nanotechnology in concrete – A reviewConstruction and Building Materials, 2010
- Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocompositesCement and Concrete Composites, 2010
- Capillary pressure in fresh cement-based materials and identification of the air entry valueCement and Concrete Composites, 2008
- Production of MgO-type expansive agent in dam concrete by use of industrial by-productsBuilding and Environment, 2008
- Experimental investigation into early age shrinkage of cement paste by using fibre Bragg gratingsCement and Concrete Composites, 2004
- Thermal Contraction of Carbon Fullerenes and NanotubesPhysical Review Letters, 2004