Development of a 2-degree-of-freedom decoupled flexural mechanism for micro/nanomachining
Authors:
- 2 September 2014
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 229 (11) , 1900-1911
Abstract
In this article, a novel decoupled two-degree-of-freedom parallel flexural mechanism is proposed for precision engineering, such as micro/nanomeasuring and machining. The two-degree-of-freedom flexural mechanism is developed with the parallel-kinematic constraint map method to achieve totally geometric decoupling and the actuator isolation. By means of the matrix which is based on compliance modeling method, the compliance matrix of the flexural mechanism has been analytically derived and then the obtained theoretical results are verified by the finite element analysis. Experiment tests are conducted to investigate the practical performances of the developed two-degree-of-freedom flexural mechanism. The experimental results show that the maximum stroke along z-axis and y-stroke are 10.82 and 11.84 µm, respectively, and the corresponding maximum couplings in y-axis and z-axis directions are less than 3%. The first obtained resonant frequencies in the two moving directions are 420 and 450 Hz through the method of swept excitations, respectively.Keywords
This publication has 20 references indexed in Scilit:
- A flexure-based long-stroke fast tool servo for diamond turningThe International Journal of Advanced Manufacturing Technology, 2011
- A Novel Piezoactuated XY Stage With Parallel, Decoupled, and Stacked Flexure Structure for Micro-/NanopositioningIEEE Transactions on Industrial Electronics, 2010
- Development of a High-Bandwidth XY Nanopositioning Stage for High-Rate Micro-/NanomanufacturingIEEE/ASME Transactions on Mechatronics, 2010
- Development and Assessment of a Novel Decoupled XY Parallel Micropositioning PlatformIEEE/ASME Transactions on Mechatronics, 2009
- Design and Analysis of a Totally Decoupled Flexure-Based XY Parallel MicromanipulatorIEEE Transactions on Robotics, 2009
- Design, Identification, and Control of a Flexure-Based XY Stage for Fast Nanoscale PositioningIEEE Transactions on Nanotechnology, 2008
- Review of vibration-assisted machiningPrecision Engineering, 2008
- Characteristics of elliptical vibration cutting in micro-V grooving with variations in the elliptical cutting locus and excitation frequencyJournal of Micromechanics and Microengineering, 2007
- Constraint-Based Design of Parallel Kinematic XY Flexure MechanismsJournal of Mechanical Design, 2006
- Piezodriven 50-μm range stage with subnanometer resolutionReview of Scientific Instruments, 1978