Micro-structural and morphological analyses of coated ‘liquid wood’ samples by ceramic particles
- 16 May 2019
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (8) , 085326
Abstract
The paper presents some investigations of coated samples, by SEM, EDAX and XRD analyses. For the research have been considered the Arboform L, V3, Arboblend V2 and Arbofill Fichte as base materials used for ceramic particle coating process. The samples were obtained by injection moulding technology and for the coatings processes were used the atmospheric plasma spray method and SPRAYWIZARD 9MCE facility. Three intermediate layers of Ni78W14Mn6Al2, Ni55W26Cr13F6, W49Ni44Cr6Mn1 and a final ceramic layer of aluminium oxide (Al2O3) were deposited. The final layer may have the role of increasing the mechanical properties of wear, hardness and increase of thermal resistance. A disadvantage may be the increasing of samples fragility and reducing their biodegradability. The obtained results after this research, recommend these coated materials to be used in harsh operating conditions such as the automotive industry.Keywords
This publication has 11 references indexed in Scilit:
- The liquid wood heat flow and material properties as a function of temperatureMaterials Research Express, 2018
- Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatingsWear, 2017
- Tribological and mechanical behaviour of Cr 3 C 2 –NiCr thermally sprayed coatings after prolonged agingSurface and Coatings Technology, 2016
- Thermal behaviour and stability of the Arboform® LV3 nature liquid woodComposites Part B: Engineering, 2016
- Tensile Test For Arboform SamplesACTA Universitatis Cibiniensis, 2015
- Microstructure Evolution and Thermal Durability with Coating Thickness in APS Thermal Barrier CoatingsMaterials Today: Proceedings, 2014
- Microindentation and differential scanning calorimetry of “liquid wood”Composites Part B: Engineering, 2013
- Investigation on microstructure and mechanical properties of samples obtained by injection from ArbofillComposites Part B: Engineering, 2013
- Corrosion behavior of Cr3C2–NiCr vacuum plasma sprayed coatingsSurface and Coatings Technology, 2008
- An analytical model for predicting residual stresses in progressively deposited coatings Part 1: Planar geometryThin Solid Films, 1997