High temperature die-attach materials for aerospace power electronics: Lifetime tests and modeling
Authors:
- 1 March 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1095323X,p. 1-8
Abstract
Increasing the temperature in power electronic applications usually causes a decreasing lifetime and reliability. This study shows that packaging materials and technologies, such as silver-sintering or gold germanium solders combined with silicon-carbide devices, can easily deal with temperatures above 200 °C/392 °F. Furthermore, lifetime tests (active power cycling) with 300 devices offered more cycles to failure at 120 °C/248 °F heat sink temperature than at 40 °C/104 °F (same ΔT) for silver-sintered samples and gold-germanium solders. SAC305 and tin-lead solders were also tested for comparison but could not withstand the harsh conditions. The samples were silicon carbide diodes attached to copper-ceramic-substrates (DBCs). For testing, the devices were heated up by current to achieve a 130 K temperature swing at different coolant temperatures (250 °C/482 °F maximum temperature). The reason behind the higher lifetime at elevated temperatures is the increasing ductility over temperature. The materials capability against thermo-mechanical stress is better at higher temperatures, while creep effects are not dominating. This effect can be used especially for high temperature application with extraordinary requirements on lifetime and reliability. Analytical models based on stress strain calculations can explain this material behavior. Together with an in-situ measurement of the thermal impedance the models can predict the lifetime consumption of the application and thereby upcoming maintenance.Keywords
This publication has 14 references indexed in Scilit:
- Methodology and apparatus for rapid power cycle accumulation and in-situ incipient failure monitoring for power electronic modules2014
- Packaging of high-temperature planar power modules interconnected by low-temperature sintering of nanosilver paste2014
- SiC Die Attach for High-Temperature ApplicationsJournal of Electronic Materials, 2013
- Creep properties of low-temperature sintered nano-silver lap shear jointsMaterials Science and Engineering: A, 2013
- Extending the lifetime of power electronic assemblies by increased cooling temperaturesMicroelectronics Reliability, 2013
- Comprehensive characterization of thermophysical properties in solids using thermal impedanceJournal of Applied Physics, 2012
- Mechanical properties of nano-silver joints as die attach materialsJournal of Alloys and Compounds, 2012
- A Note on Suhir’s Solution of Thermal Stresses for a Die-Substrate AssemblyJournal of Electronic Packaging, 2004
- Analysis of interfacial thermal stresses in a trimaterial assemblyJournal of Applied Physics, 2001
- Fast power cycling test of IGBT modules in traction application1997