Effect of Zn and Cu Addition on Mechanical Properties of As-Extruded Mg-3Sn-1Ca Alloy
Open Access
Abstract
The effects of Zn and Cu addition on the microstructure and mechanical properties of the extruded Mg-3Sn-1Ca alloy were systematically studied. The effects of the grain size, texture, type and distribution of the second phase on the mechanical properties of the alloy were analyzed. The mechanical test results show that the addition of Zn and Cu elements can significantly improve the mechanical properties of the alloy. The as-extruded Mg-3Sn-1Ca-1Zn-1Cu alloy has the best comprehensive mechanical properties, and the UTS, YS and EL are 244 MPa, 159 MPa and 13.4%, respectively. Compared with the Mg-3Sn-1Ca alloy, the UTS and EL of the Mg-3Sn-1Ca-1Zn alloy are increased by 50 MPa and 132%, respectively. However, the UTS of the TXC311 alloy is increased by 55 MPa, but the ductility of the Mg-3Sn-1Ca-1Cu alloy is far less than that of the Mg-3Sn-1Ca-1Zn alloy, which is mainly attributed to the presence of a large amount of hard and brittle Mg2Cu phase in the alloy. Interestingly, the addition of Zn to Mg-3Sn-1Ca-1Cu alloy can improve the elongation of the alloy, which is due to the solid solution strengthening caused by the Zn element and the formation of small MgZnCu phase with Zn element and the consumption of Mg2Cu phase.Keywords
Funding Information
- Key project of Education of Department of Liaoning Province (LJKZ1171, 2020M680978, 2020-BS-260)
- China Postdoctoral Fund (LJKZ1171, 2020M680978, 2020-BS-260)
- Liaoning province doctor start fund project (LJKZ1171, 2020M680978, 2020-BS-260)
This publication has 41 references indexed in Scilit:
- Microstructure, Mechanical Properties and Compressive Creep Behavior of as-Cast Mg-5Sn-(0∼2)Cu AlloysRare Metal Materials and Engineering, 2014
- Limitations in the use of the potentiodynamic polarisation curves to investigate the effect of Zn on the corrosion behaviour of as-extruded Mg–Zn binary alloyCorrosion Science, 2013
- Effects of lattice parameter changes on critical resolved shear stress and mechanical properties of magnesium binary single crystalsMaterials Science and Engineering: A, 2012
- Microstructure and mechanical properties of Mg–6Zn–xCu–0.6Zr (wt.%) alloysJournal of Alloys and Compounds, 2011
- Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metalsScripta Materialia, 2010
- Predicting grain refinement by cold severe plastic deformation in alloys using volume averaged dislocation generationActa Materialia, 2009
- Solid-solution hardening and softening in Mg–Zn alloysMaterials Science and Engineering: A, 2008
- Hot workability characteristics of cast and homogenized Mg–3Sn–1Ca alloyJournal of Materials Processing Technology, 2008
- Microstructure and Mechanical Properties of Mg-Al-Ca-Nd Alloys Fabricated by Gravity Casting and Extrusion ProcessMATERIALS TRANSACTIONS, 2008
- Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloysScripta Materialia, 2003