Sequential Injection Separation System with Stopped-Flow Radiometric Detection for Automated Analysis of99Tc in Nuclear Waste
- 3 February 1998
- journal article
- research article
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 70 (5) , 977-984
Abstract
An automated procedure for the determination of 99Tc in aged nuclear waste has been developed. Using advanced sequential injection (SI) analysis instrumentation, 99Tc(VII) is separated from radioactive and stable interferences using a TEVA resin column that selectively retains pertechnetate ion from dilute nitric acid solutions. The separated 99Tc is eluted with 6 M nitric acid and quantified on-line with a flow-through liquid scintillation detector. A stopped-flow technique has been optimized that improves the analysis precision and detection limit compared to continuous-flow detection, reduces consumption of liquid scintillation cocktail, and increases sample throughput by separating the next sample while the present sample is being counted. The detection limit is 30 pCi, or 2 ng, of 99Tc, using a 15-min stopped-flow period. The analysis time is 40 min for the first sample and is reduced to 20 min for each subsequent sample. Processed nuclear waste samples from the Hanford site were successfully analyzed by this new method.Keywords
This publication has 16 references indexed in Scilit:
- Determination of Technetium-99 in Aqueous Solutions by Inductively Coupled Plasma Mass Spectrometry: Effects of Chemical Form and MemoryJournal of Analytical Atomic Spectrometry, 1997
- Determination of uranium by flow injection inductively coupled plasma mass spectrometryAnalytica Chimica Acta, 1996
- Separation and preconcentration of actinides by extraction chromatography using a supported liquid anion exchanger: application to the characterization of high-level nuclear waste solutionsAnalytica Chimica Acta, 1995
- Use of silicotitanates for removing cesium and strontium from defense wasteIndustrial & Engineering Chemistry Research, 1994
- Sequential injection analysis for electrochemical measurements and process analysisThe Analyst, 1994
- Tutorial review. Discovering flow injection: journey from sample to a live cell and from solution to suspensionThe Analyst, 1994
- From flow injection to sequential injection: comparison of methodologies and selection of liquid drivesThe Analyst, 1993
- Sequential injection: a new concept for chemical sensors, process analysis and laboratory assaysAnalytica Chimica Acta, 1990
- Flow injection analysis, 2nd edn.Analytica Chimica Acta, 1989
- Radiochemical measurements of99Tc: Sources and environmental levelsJournal of Radioanalytical and Nuclear Chemistry, 1988