Biographite from Wood—Surpassing Structural Limitations by Catalytic Graphitization Using Iron Sulfate Salts
Authors:
Open Access
Abstract
Biomass serves as an abundant carbon feedstock, yet its inherently “non-graphitizable” nature typically limits its use in high-performance applications such as batteries and electronics. This study investigates the catalytic graphitization of wood dust using iron(II) sulfate (IS) and ammonium-iron(II) sulfate (AIS) as scalable, non-toxic alternatives to traditional metal catalysts such as Ni, Co or Mo. Wood powder was impregnated with aqueous solutions of these Fe salts and carbonized at temperatures ranging from 900 °C to 2200 °C, followed by structural and electrical characterization using XRD, Raman spectroscopy, gas adsorption, and four-point probe resistance measurements. Results demonstrate that both Fe salts successfully induced high-order graphitic regions at temperatures as low as 1100 °C, achieving interlayer spacing (~0.336 nm) close to perfect graphite, while non-impregnated wood remained poorly ordered even at 2200 °C with interlayer spacing that can be associated with turbostratic structures. This improved structural ordering is also reflected in the electrical conductivity of the catalytically graphitized samples, which is competitive with commercial graphite already at production temperatures as low as 1300 °C. Additionally, in the medium temperature range around 1500 °C, the catalytically graphitized samples show unique combinations of high conductivity and large specific surface area (up to 586 m2 g−1). These findings show that iron salts are effective, sustainable catalysts for transforming biomass into high-quality graphitic carbon at significantly reduced process temperatures.Keywords
Funding Information
- European Regional Development Fund (Sus2C)
- Austrian ministry BMLUK (FO999893363)
- Austrian ministries BMIMI, BMWET and the provinces of Upper Austria, Lower Austria and Carinthia (892416)
- Ministry of Science, Technological Development, and Innovation (451-03-34/2026-03/200146)
- Serbian Academy of Sciences and Arts (F-49)
- Christian Doppler Society
This publication has 48 references indexed in Scilit:
- Elucidating the Mechanism of Iron‐Catalyzed Graphitization: The First Observation of Homogeneous Solid‐State CatalysisAdvanced Materials, 2024
- Catalytic Graphitization of Biocarbon for Lithium‐Ion Anodes: A MinireviewChemSusChem, 2023
- Investigation on the mechanism of structural reconstruction of biochars derived from lignin and cellulose during graphitization under high temperatureBiochar, 2023
- Highly electrically conductive graphene papers via catalytic graphitizationNano Research, 2022
- Catalytic graphitization of kraft lignin to graphene-based structures with four different transitional metalsJournal of Nanoparticle Research, 2018
- Catalytic conversion of Kraft lignin to bio-multilayer graphene materials under different atmospheresJournal of Materials Science, 2018
- The Influence of Conductive Additives and Inter‐Particle Voids in Carbon EDLC ElectrodesFuel Cells, 2010
- Spectroscopic analysis of carbonization behavior of wood, cellulose and ligninJournal of Materials Science, 2006
- Catalytic graphitization of hardwood acetic acid lignin with nickel acetateJournal of Wood Science, 2003
- Phenomena of catalytic graphitizationJournal of Materials Science, 1982