Effective Adsorption of Congo Red from Aqueous Solution Using Fe/Al Di-Metal Nanostructured Composite Synthesised from Fe(III) and Al(III) Recovered from Real Acid Mine Drainage
Open Access
- 25 February 2022
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 12 (5) , 776
Abstract
This study presents the first known exploration of Congo red dye (CR) adsorption by a polycationic Fe/Al Di-metal nanostructured composite (PDFe/Al) synthesised using Fe(III) and Al(III) recovered from authentic acid mine drainage (AMD). The PDFe/Al successfully removed CR from the aqueous solution. The mineralogical, microstructural, and chemical properties of the synthesised PDFe/Al adsorbent (before and after adsorption) were studied using state-of-the-art analytical instruments. The optimum conditions were observed to be 100 mg·L−1 CR, 1 g of the PDFe/Al in 500 mL adsorbate solution, 20 min of shaking, pH = 3–8, and a temperature of 35 °C. At optimised conditions, the PDFe/Al showed ≥99% removal efficacy for CR dye and an exceptionally high Langmuir adsorption capacity of 411 mg·g−1. Furthermore, a diffusion-limited adsorption mechanism was observed, with two distinct surfaces involved in the adsorption of CR from an aqueous solution. It was determined that the adsorption of CR induced internal strain and deformation within the matrices and interlayers of the PDFe/Al which resulted in a marked increase in the adsorbent pore surface area and pore volume. The remarkably high adsorption capacity could be attributed to the high surface area. A regeneration study showed that the adsorbent could be reused more than four times for the adsorption of CR. The findings from this study demonstrated the feasibility of recovering valuable minerals from toxic and hazardous AMD and demonstrated their potential for the treatment of industrial wastewaters.Keywords
Funding Information
- National Research Foundation (SFH160713177910)
- Max-Buchner-Forschungsstiftung (3824)
- OeAD-GmbH (Africa-UniNet P056, APPEAR Prep222, BG 01/2021, KOEF 01/2019 and TW 01/2021)
This publication has 78 references indexed in Scilit:
- Adsorption characteristics, isotherm, kinetics, and diffusion of modified natural bentonite for removing diazo dyeChemical Engineering Journal, 2012
- Adsorption studies of arsenic on nano aluminium doped manganese copper ferrite polymer (MA, VA, AA) composite: Kinetics and mechanismChemical Engineering Journal, 2011
- Adsorption and Desorption of Phenanthrene on Carbon Nanotubes in Simulated Gastrointestinal FluidsEnvironmental Science & Technology, 2011
- Insights into the modeling of adsorption isotherm systemsChemical Engineering Journal, 2010
- Activated carbons prepared from wood particleboard wastes: Characterisation and phenol adsorption capacitiesJournal of Hazardous Materials, 2009
- Kinetic study and equilibrium isotherm analysis of Congo Red adsorption by clay materialsChemical Engineering Journal, 2009
- Phosphorus removal by acid mine drainage sludge from secondary effluents of municipal wastewater treatment plantsWater Research, 2008
- Adsorption strains in porous siliconPhysical Review B, 1996
- Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984)Pure and Applied Chemistry, 1985
- The Diffusion of Dye SolutionsBulletin of the Chemical Society of Japan, 1950