Achieving high property medium-thick Ti/Al dissimilar joints by double side friction stir welding
Authors:
- 1 November 2022
- journal article
- research article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 27 (8) , 655-663
Abstract
Double side friction stir welding (DS-FSW) was used to join TC4 titanium alloy and 2024-T4 aluminium alloy having dissimilar medium-thick plates with a thickness of 8 mm. The microstructure and mechanical properties in medium-thick Ti/Al dissimilar DS-FSW joints were systematically studied. It revealed that the diffusion-type Ti/Al interface was mainly formed when the rotating speed is low. While intermetallic compounds layers were formed at the Ti/Al interface due to the high welding temperature and intense mechanical mixing at a relatively high rotating speed. The maximum tensile strength of medium-thick Ti/Al dissimilar DS-FSW joint is 265 MPa achieved at the rotation speed of 300 rev min –1 , which is 58.9% of the base material of 2024-T4 aluminium alloy.Keywords
Funding Information
- National Natural Science Foundation of China (51905309)
- National Natural Science Foundation of China (52035005)
This publication has 41 references indexed in Scilit:
- Dissimilar friction stir welding of Ti–6Al–4V alloy and aluminum alloy employing a modified butt joint configuration: Influences of process variables on the weld interfaces and tensile propertiesMaterials & Design (1980-2015), 2014
- Fine grained Mg–3Al–1Zn alloy with randomized texture in the double-sided friction stir welded jointsMaterials Science and Engineering: A, 2013
- Interfacial Microstructure and Mechanical Properties of Dissimilar Friction Stir Welds between 6061-T6 Aluminum and Ti-6%Al-4%V AlloysMATERIALS TRANSACTIONS, 2011
- Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3Materials Science and Engineering: A, 2009
- Temperature evolution, microstructure and mechanical properties of friction stir welded thick 2219-O aluminum alloy jointsMaterials & Design (1980-2015), 2009
- Formation process of the bonding joint in Ti/Al diffusion bondingMaterials Science and Engineering: A, 2008
- Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copperJournal of Materials Processing Technology, 2006
- Mechanical properties of friction welded joint between Ti–6Al–4V alloy and Al–Mg alloy (AA5052)Science and Technology of Welding and Joining, 2005
- Interlayer growth at interfaces of Ti/Al–1%Mn, Ti/Al–4·6%Mg and Ti/pure Al friction weld joints by post-weld heat treatmentScience and Technology of Welding and Joining, 2004
- Calculations of lattice parameters and reaction-induced volume and stress changes for Al(Ti) alloysJournal of Applied Physics, 1996