Interfacial effects during the analysis of multilayer metal coatings by radio-frequency glow discharge optical emission spectroscopy : Part 1. Crater shape and sputtering rate effects
- 11 July 2005
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 20 (10) , 1108-1115
Abstract
In depth profile analysis by radio-frequency glow discharge optical emission spectroscopy (rf-GDOES) techniques, the depth resolution mainly depends on the roughening induced during the sputtering and the resulting crater geometry. In this work we have tried to isolate the contributions of the different effects that degrade the depth resolution in GDOES analysis of metal coatings deposited on silicon substrates. First, the existence of an edge well around the crater (“edge effect”), deeper than the crater bottom, results in an initial rise of the quantified profile of the bottom layer before reaching the interface. A second effect is the induced roughening of the crater bottom, which produces a broadening of the interface width. Finally, we have explained the long tails observed after crossing the interface in the metal profiles in terms of the sputtering of material re-deposited at the crater wall. The importance of these effects was tested for the particular case of multilayer stacks consisting of alternating chromium and titanium layers of different thicknesses. Reversing the order of the layers showed the influence of different sputtering rates of the materials in the depth profile. The profiles of materials with high sputtering rate (i.e., chromium in this study) become less affected than material with low sputtering rate (titanium) due to lower mixing of the layers.Keywords
This publication has 21 references indexed in Scilit:
- Radio-frequency glow discharge spectrometry:Spectrochimica Acta Part B: Atomic Spectroscopy, 2004
- Comparison of depth profiling techniques using ion sputtering from the practical point of viewThin Solid Films, 2003
- Comparison of depth resolution for direct current and radiofrequency modes in glow discharge optical emission spectrometryJournal of Analytical Atomic Spectrometry, 1995
- Quantitative evaluation of depth profiles analysed by glow discharge optical emission spectroscopy: analysis of diffusion processesSpectrochimica Acta Part B: Atomic Spectroscopy, 1992
- Depth profile analysis of an electrodeposited multilayer structure with non‐uniform thickness distribution by glow discharge optical spectroscopySurface and Interface Analysis, 1991
- Correcting the depth profiles broadened by the crater effect: A numerical procedureSurface and Interface Analysis, 1990
- Depth analysis of nickel thin films on silicon by glow discharge spectroscopy: The interface regionSurface and Interface Analysis, 1990
- A formalism for correcting the GDOS concentration depth profilesCzechoslovak Journal of Physics, 1990
- Depth analysis of metal coatings by glow discharge spectrometry with an argon—helium gas mixtureSurface and Interface Analysis, 1989
- Depth analysis of electrodeposited iron–nickel and copper–zinc alloy coatings by glow discharge emission spectroscopySurface and Interface Analysis, 1988