Experimental Study and Life Prediction of Bolt Loosening Life under Variable Amplitude Vibration
Open Access
- 1 January 2019
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2019 (1)
Abstract
The transverse vibration test of bolts has been designed with adoption of the fatigue tester to study the features of the loosening life of bolts. Firstly, the transverse vibration frequency has been changed, the effects of the amplitudes of displacement, velocity, and acceleration on the loosening life of bolts have been compared, and it has been confirmed that the transverse displacement amplitude is the main factor that affects bolt loosening in low‐frequency vibration. Secondly, the loosening degree of the bolts preloaded standard under five displacement amplitude grades has been monitored and the bolt loosening situation has been expressed through the residual preload‐vibration times curve. The data of each stage of residual preload under each displacement amplitude were summarized, and the displacement‐life (D-N) curve of bolt loosening under different loosening situations (percentage of residual preload) which is referred to the material fatigue life S-N curve was drawn. Finally, the accumulation mechanism of bolt loosening has been studied and the linear accumulation model of bolt loosening has been set up through designing variable amplitude vibration tests at high‐low and low‐high displacement stages. Results show that, through the bolt loosening D-N curve, it can be found out that the bolt loosening life curve and the material fatigue life curve are with features of double line and high‐ and low‐cycle boundary under the logarithmic coordinate. Linear accumulation of bolt loosening is with similar principle of linear damage accumulation of material fatigue. Therefore, the bolt loosening life can be predicted through bolt displacement‐loosening life (D-N) curve attained from the experiment and the established linear accumulation model of bolt loosening.Keywords
Funding Information
- National Natural Science Foundation of China (U1534209, 51675446)
This publication has 18 references indexed in Scilit:
- Criterion for Preventing Self-Loosening of Preloaded Cap Screws Under Transverse Cyclic ExcitationJournal of Vibration and Acoustics, 2011
- Analytical and Experimental Investigation of Self-Loosening of Preloaded Cap Screw FastenersJournal of Vibration and Acoustics, 2011
- A Mathematical Model for Vibration-Induced Loosening of Preloaded Threaded FastenersJournal of Vibration and Acoustics, 2009
- Effect of Thread and Bearing Friction Coefficients on the Vibration-Induced Loosening of Threaded FastenersJournal of Vibration and Acoustics, 2007
- Novel Formulation of the Tightening and Breakaway Torque Components in Threaded FastenersJournal of Pressure Vessel Technology, 2006
- Study of the Effect of Hole Clearance and Thread Fit on the Self-Loosening of Threaded FastenersJournal of Mechanical Design, 2006
- Effect of Thread Pitch and Initial Tension on the Self-Loosening of Threaded FastenersJournal of Pressure Vessel Technology, 2005
- A Study of Early Stage Self-Loosening of Bolted JointsJournal of Mechanical Design, 2003
- Three-dimensional finite element analysis of threaded fastener loosening due to dynamic shear loadEngineering Failure Analysis, 2002
- An experimental study of the torque-tension relationship for bolted jointsInternational Journal of Materials and Product Technology, 2001