Ion-Selective Electrode for Nitrates Based on a Black PCV Membrane
Open Access
Abstract
Carbon nanomaterials were introduced into this research as modifiers for polymeric membranes for single-piece electrodes, and their properties were studied for the case of nitrate-selective sensors. The use of graphene, carbon black and carbon nanotubes is shown to significantly improve the potentiometric response, while no redox response was observed. The use of carbon nanomaterials results in a near-Nernstian response (54 mV/pNO3−) towards nitrate ions over a wide linear range (from 10−1 to 10−6 M NO3−). The results obtained by chronopotentiometry and electrochemical impedance spectroscopy reveal little resistance, and the capacitance parameter is as high as 0.9 mF (for graphene-based sensor). The high electrical capacity of electrodes results in the good stability of the potentiometric response and a low potential drift (0.065 mV/h). Introducing carbon nanomaterials into the polymetric membrane, instead of using them as separate layers, allows for the simplification of the sensors’ preparation procedure. With single-piece electrodes, one step of the procedure could be omitted, in comparison to the procedure for the preparation of solid-contact electrodes.Keywords
Funding Information
- program “Excellence initiative-research university” for the AGH University of Krakow
This publication has 34 references indexed in Scilit:
- Adding Plasticizer Dispersible Conducting Polymer to the Ion‐selective Membrane Composition – Revitalizing Single Piece Ion‐selective Electrodes ConceptElectroanalysis, 2022
- All-solid-state potentiometric sensor using single-walled carbon nanohorns as transducerSensors and Actuators B: Chemical, 2019
- A general approach to one-step fabrication of single-piece nanocomposite membrane based Pb2+-selective electrodesSensors and Actuators B: Chemical, 2019
- A solid-contact potassium-selective electrode with MoO2 microspheres as ion-to-electron transducerAnalytica Chimica Acta, 2017
- All-solid-state selective electrodes using carbon blackTalanta, 2012
- Development of an all-solid-state potassium ion-selective electrode using graphene as the solid-contact transducerElectrochemistry Communications, 2011
- Gold nanoparticles solid contact for ion-selective electrodes of highly stable potential readingsTalanta, 2011
- Single-piece solid-contact ion-selective electrodes with polymer–carbon nanotube compositesSensors and Actuators B: Chemical, 2010
- Potential Drifts of Solid-Contacted Ion-Selective Electrodes Due to Zero-Current Ion Fluxes Through the Sensor MembraneElectroanalysis, 2000
- Polymer Membrane Ion-Selective Electrodes-What are the Limits?Electroanalysis, 1999