Analysis of AC Losses in the ITER Central Solenoid Insert Coil
- 29 November 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 27 (4) , 1-5
Abstract
The circle-in-square cable-in-conduit conductor that will be adopted for the 3L module of the ITER Central Solenoid (CS) coil has been recently tested to assess its performance in conditions relevant for the real operation of the magnet. The tests on a ~43-m-long conductor were performed in the CS Insert Project carried out under the responsibility of the US ITER Domestic Agency, in charge of the CS modules manufacturing. In this paper, we present an evaluation of the ac losses of this conductor aiming at the assessment of the nτ value for the conductor coupling losses. The electromagnetic (EM) and thermal-hydraulic (TH) analysis of these experiments is then performed. A detailed distribution of the coupling losses in the conductor is computed, with the electromagnetic part of the THELMA model. The obtained power density distribution is then input to the TH model (the 4C code) to compute the TH parameters (e.g., the temperature evolution at selected locations along the conductor) during Central Solenoid Model Coil current dumps. The EM/TH model is then validated against experimental data and used to extract relevant information on the conductor ac losses.Keywords
Funding Information
- University of Bologna
- ITER International Organization (#ITER/CT/12/4300000542)
- EUROfusion Postdoctoral Fellowship
This publication has 18 references indexed in Scilit:
- Hysteresis Losses and Effective $J_{\mathrm{c}}(B)$ Scaling Law for ITER Nb3Sn StrandsIEEE Transactions on Applied Superconductivity, 2016
- Analysis of AC Losses in the EAST Superconducting Magnets Using the 4C CodeIEEE Transactions on Applied Superconductivity, 2015
- Fabrication of an Insert to Measure Performance of ITER CS ConductorIEEE Transactions on Applied Superconductivity, 2014
- Application of the 4C code to the thermal–hydraulic analysis of the CS superconducting magnets in EASTCryogenics, 2014
- Design of a $\hbox{Nb}_{3}\hbox{Sn}$ Cable-in-Conduit Conductor to Withstand the 60 000 Electromagnetic Cycles of the ITER Central SolenoidIEEE Transactions on Applied Superconductivity, 2013
- Results of the TF conductor performance qualification samples for the ITER projectSuperconductor Science and Technology, 2012
- Status of ITER Conductor Development and ProductionIEEE Transactions on Applied Superconductivity, 2012
- Full-scale calculation of the coupling losses in ITER size cable-in-conduit conductorsSuperconductor Science and Technology, 2011
- The 4C code for the cryogenic circuit conductor and coil modeling in ITERCryogenics, 2010
- Progress of the ITER central solenoid model coil programmeNuclear Fusion, 2001