Effect of martensitic phase transformation and deformation twinning on mechanical properties of Fe–Mn–Si–AI steels
Authors:
- O. GrässelOGO. Grässel
- G. FrommeyerGFG. Frommeyer
- 1 December 1998
- journal article
- research article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 14 (12) , 1213-1217
Abstract
Deformation twinning, martensitic phase transformation and mechanical properties of austenitic Fe–(15–30) wt-%Mn alloys with additions of Al and Si have been investigated. Tensile tests were carried out at different strain rates and temperatures. The formation of twins, α′ (bcc)- and ε (hcp)-martensite in the γ (fcc) matrix during plastic deformation was analysed by optical microscopy, X-ray diffraction, and scanning electron microscopy. Depending on the content of the alloying elements different phase transformations γ → ε, γ → α′ (TRIP effect), or the formation of deformation twins (TWIP effect) occurred. Additions of Al increased the stacking fault energy (γfcc) and suppressed the γ → ε transformation while Si decreased γfcc and sustained the γ → ε transformation. These steels with reduced densities of about 7.3 Mg m−3 exhibit high tensile ductility up to 95% with true tensile strength of about 1100 MPa. The excellent plasticity induced by twinning or phase transformation up to extremely high strain rates of about results in an extraordinary shock resistance and allows for deep drawing and backward extrusion operations of parts with complex shapes.Keywords
This publication has 5 references indexed in Scilit:
- The effects of deformation twins and strain-induced ϵ-martensite on mechanical properties of an Fe-32Mn-12Cr-0.4C cryogenic alloyScripta Metallurgica et Materialia, 1995
- Effect of Si and Al additions on the low temperature toughness and fracture mode of Fe-27Mn alloys.ISIJ International, 1990
- Microstructural dependence of Fe-high Mn tensile behaviorMetallurgical Transactions A, 1986
- Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part I. Magnetic Measurements and Mechanical BehaviorMetallurgical Transactions A, 1982
- Stacking fault energies of seven commercial austenitic stainless steelsMetallurgical Transactions A, 1975